Set of round stainless steel cutters in the most frequent diamensions used to create bases as well as fillings of bases. That will allow you to cut clays and other materials quickly.

Content: 11 pieces
Sizes: 22mm, 25mm, 30mm, 32mm, 38mm, 40mm, 48mm, 50mm, 55mm, 58mm, 60mm
Material: Stainless steel
Food grade

Extra fine-grained, water-based and fast-drying putty with an extra hard finish. Specially designed for modeling and perfect as a superfine filler due to its adhesion and sanding properties. Does not shrink when drying. Can be cleaned and thinned with water. Non toxic and non flammable.

Contains: 20ml

Roll Maker is the ultimate tool to make all kind of tubes, tentacles, and wires to be used with any kind of putty or clay.

Depending on your sculpting material you may need to wet repeatedly the plates or your fingers with bit of water to reduce stickiness. Adding talcum powder to water may help with some putties like Green Stuff. 

Use a toothbrush to clear any residue from plates if required, and never use wire brushes or metal implements since plates may be damages. 

This set includes:

2 large plates
2 medium plates
2 small plates
2 guide bars. Use them to hold the plates and to get an extra 45º position for new textures.

COLORSHIFT CHAMELEON METAL PAINT

Chameleon metal paints will create a colourshift visual effect depending on the viewing angle. Valid for brush and airbrush. 
Best results will be obtained with Airbrush.

Made without animal products. Non edible.

Uses: Shake well and apply over BLACK basecoat. For the best effects, use gloss blackcoat so it will increase the effect. 
Semitransparent chamaleon paints could also be applied over other basecoat colors to achieve different colorshift effects. Paint 
very very light coats till maximum colour shows up and basecoat is no longer visible. Each coat should be dried before applying the next coat. Use varnish only when paint is totally dried.

Contents: This offer includes an acrylic COLORSHIFT Chameleon color with ultra fine pigments. Non-Toxic Waterbased paint. Non-Flameable. No Latex. 

Kneadatite Blue/Yellow Green Stuff is a room-temperature curing two-part epoxy putty sold either in tape format. 

Mixing equal parts of the yellow 'filler' and blue 'hardener' produces a sticky green putty that feels a lot like chewed bubble gum. Once mixed, it has a worklife of 90 minutes, allowing time for shaping and detailing, reaching 'ultimate hardness' after 24 hours. Altering the mix with more blue or yellow component will produce a faster/slower and harder/softer cure.

We recommend to use a little lubricant to prevent Green Stuff from sticking. Normally water is enough but some people also use others such as Vaseline, petroleum jelly or even jhonson baby oil to get smooth surfaces. Keep wet fingers and tools to make easier the sculpting and modeling process. You may also add talcum powder to reduce the stickiness and avoid fingerprints.

This Set contains 18 inches of material --> 46 cm

These opaque fluorescent acrylic paints will make your miniatures and dioramas vividly colourful. They are characterised by their highly intense brightness, reaching maximum brightness over white paint.

In addition, they react and glow under ultraviolet/black light, offering an infinite number of creative possibilites.

Non-toxic. Valid for brush and airbrush.

Content: 1x 17ml bottle

Available in various colors.

*This Paint may contain a protective seal, remove before use.

MDF BASES - ROUND 50mm 

Top quality MDF bases for mounting wargames figures.

These opaque fluorescent acrylic paints will make your miniatures and dioramas vividly colourful. They are characterised by their highly intense brightness, reaching maximum brightness over white paint.

In addition, they react and glow under ultraviolet/black light, offering an infinite number of creative possibilites.

Non-toxic. Valid for brush and airbrush.

Content: 1x 17ml bottle

Available in various colors.

*This Paint may contain a protective seal, remove before use.

Model BARBED WIRE

5 metres of simulated barbed wire or razor wire- ideal for making model barbed wire in any scale from 15mm (1/100) to 54mm (1.35).  You can coil it, string it between matchsticks, cocktail sticks or wire posts to make entanglements, or glue it to the tops of walls and fences for "industrial" settings. 

These opaque fluorescent acrylic paints will make your miniatures and dioramas vividly colourful. They are characterised by their highly intense brightness, reaching maximum brightness over white paint.

In addition, they react and glow under ultraviolet/black light, offering an infinite number of creative possibilites.

Non-toxic. Valid for brush and airbrush.

Content: 1x 17ml bottle

Available in various colors.

*This Paint may contain a protective seal, remove before use.

Rubber Steel sheets are impregnated with iron to allow magnets to stick to them while remaining flexible and hardwearing. Simply cut the self-adhesive sheet to size and affix to your painted movement tray to allow miniatures with magnetic bases to stick to it. They comes in handy for many craft applications, especially in wargaming where it can be used to make your own magnetic movement trays and display bases, providing far easier movement of troops around the battlefield. The colour of the sheet is quite attractive for any movement tray. 

This set includes:

1 x rubber steel sheet 0.9 mm - A4 size

Combine them with our Magnetic Sheets or with our Neodymium Magnets for a quick, easy way of magnetising your units.

COLORSHIFT CHAMELEON METAL PAINT

Chameleon metal paints will create a colourshift visual effect depending on the viewing angle. Valid for brush and airbrush. 
Best results will be obtained with Airbrush.

Made without animal products. Non edible.

Uses: Shake well and apply over BLACK basecoat. For the best effects, use gloss blackcoat so it will increase the effect. 
Semitransparent chamaleon paints could also be applied over other basecoat colors to achieve different colorshift effects. Paint 
very very light coats till maximum colour shows up and basecoat is no longer visible. Each coat should be dried before applying the next coat. Use varnish only when paint is totally dried.

Contents: This offer includes an acrylic COLORSHIFT Chameleon color with ultra fine pigments. Non-Toxic Waterbased paint. Non-Flameable. No Latex. 

Splash Gel - Water Effect

Transparent acrylic gel especially designed to replicate moving water, waves and splashes with a realistic finish. It is ideal for naval dioramas or for scenery with smaller aquatic features such as river streams and puddles.

Drying time varies on the thickness. It is recommended to apply in thin layers, adding multiple layers if necessary. Can be combined with Ultraviolet Resin.

Contains 30ml.

Top quality plastic bases for mounting wargames figures.

Shape: Round
Thickness: 3mm
Color: Black
Bases: 20 per pack

MDF BASES - OVAL 90x120mm 

Top quality MDF bases for mounting wargames figures.

Green Stuff World's range of synethic paintbrushes, GREEN SERIES. Expertly hand-crafted and designed to help you paint your armies and figures to an exceptional standard.

There are many brush types and sizes and each one has been designed for a different purpose.

Synthetic bristles are very similar to the natural hair bristles but are more suitable for less experienced painters or for techniques which require a less watered down medium, like dry brushing. Great for single stroke techniques, and generally any other technique that requires charging minimally diluted paint as the synthetic bristles absorb less water. For techniques such as washing, blending, layering and degrading that require a more diluted medium we suggest using our natural hair brushes.

Compared with natural hair brushes, synthetic hair brushes require less maintenance to maintain the shape of the tips. It is recommended to shape the bristles into a sharp point after use, and avoid leaving paint residue dry between the bristles. After painting, leave them standing up to avoid deforming the tips. Good maintenance of these brushes will ensure their longevity.

GSW's Metal Color series brings the striking shine of metal to its collection of high quality acrylic paints.

Developed with the finest possible pigments, these carefully crafted colors offer a crisp and highly defined metallic effect for the best results. Furthermore, their ultrahigh coverage power and rapid drying make them comfortable to use.

Water-based and non-toxic, these colours have been optimised for both brush and airbrush. For best airbrush results, we recommend 1:1 dilution with acrylic thinner.

Each bottle includes a stainless steel ball for a faster and homogenous mixture.

Content:
1x 17ml of acrylic metallic colour with ultrafine pigments. Non-toxic waterbased paint. Non-flammable. No latex.

Milliput White is similar to Milliput Standard but much more suitable to get finer and smaller detailed pieces in all kind of applications. Each package contains two separate bars, one of which is a hardener. Upon mixing an equal quantity of each different bar the material starts to harden, and hardens fully in 90 minutes, after which it can be carved, sanded, drilled, and sculpted over.

If you are interrupted while you are mixing Milliput, you can put the Milliput into a deep freezer until you can get back to work. This will keep the product at approximately the same state of setting at which it was frozen for up to 24 hours

OTHER ADVANTANGES:

-        In combination with water will allow to get extra smooth surfaces.

-        It allows you easily to merge new layers of milliput over

-        It will not get stuck to your either your fingers or your tools

-        Once dried, it can be carved, sanded and drilled

-        Once dried, it remains very hard and resistance. You may mix it with Plasticine or other clays to save putty reducing it hardness.

-        Heat resistance up to 130ºC

GSW's Metal Color series brings the striking shine of metal to its collection of high quality acrylic paints.

Developed with the finest possible pigments, these carefully crafted colors offer a crisp and highly defined metallic effect for the best results. Furthermore, their ultrahigh coverage power and rapid drying make them comfortable to use.

Water-based and non-toxic, these colours have been optimised for both brush and airbrush. For best airbrush results, we recommend 1:1 dilution with acrylic thinner.

Each bottle includes a stainless steel ball for a faster and homogenous mixture.

Content:
1x 17ml of acrylic metallic colour with ultrafine pigments. Non-toxic waterbased paint. Non-flammable. No latex.

Green Stuff World's range of synethic paintbrushes, GREEN SERIES. Expertly hand-crafted and designed to help you paint your armies and figures to an exceptional standard.

There are many brush types and sizes and each one has been designed for a different purpose.

Synthetic bristles are very similar to the natural hair bristles but are more suitable for less experienced painters or for techniques which require a less watered down medium, like dry brushing. Great for single stroke techniques, and generally any other technique that requires charging minimally diluted paint as the synthetic bristles absorb less water. For techniques such as washing, blending, layering and degrading that require a more diluted medium we suggest using our natural hair brushes.

Compared with natural hair brushes, synthetic hair brushes require less maintenance to maintain the shape of the tips. It is recommended to shape the bristles into a sharp point after use, and avoid leaving paint residue dry between the bristles. After painting, leave them standing up to avoid deforming the tips. Good maintenance of these brushes will ensure their longevity.

Diameter: 3mm (1/8)
Thickness: 1mm (1/32')
Quantity: 100

Magnetisation: N35
Pull Forces: 90gr (magnet to magnet) **
Material: NdFeB
Coating: Nickel Plated (Ni-Cu-Ni)

Neodymium Magnet is the strongest type of permanent magnet commercially available. They have replaced other types of magnet in the many applications in modern products that require strong permanent magnets.

The references N35 and N52 are a measurement for the quality of the magnet material. The higher the grade (the number following the 'N'), the stronger the magnet. These will explain two things:
- How much "magnetic energy" per volume is contained in this magnet material
- Up to what temperature the magnet can be used

Magnets that begin with an "N" should be used up to 80°C (176°F).
The highest grade of neodymium magnet currently available is N52. 

If you take any two magnets of different sizes and magnetisation from our range, the difference in their strength is more due to the differences in their volume than the differences in their magnetisation. That's why the larger magnet is mostly the stronger magnet, even when its magnetisation classification is somewhat smaller.

** Pull Forces: Expected pull forces based on extensive product testing. The Surface Field data is only valid for points along the center axis of the magnet, and assumes a single magnet in free space.

If you are planning to use them with wargames and miniatures we will recommend you as follows: 

- Neodymium Magnet - 3x0.5mm, for exchanging weapons, heads, arms, etc ... 
- Neodymium Magnet - 3x1mm, for exchanging weapons, heads, arms, etc ... 
- Neodymium Magnet - 3x2mm, for plastic miniatures bases.
- Neodymium Magnet - 5x2mm, for metal miniatures bases.

Acrylic paints with an opaque and smooth matt finish, especially designed for modelling and miniature painting. Formula curated and carefully developed by experienced artists using a new generation of pigments, the Acrylic Color range aims to provide a full spectrum of all basic tones and shades necessary for wargames, vehicles, miniatures and dioramas, as well as colours exclusive to GSW.

Rich in high quality pigments, these colours will leave a fine homogenous layer of fast drying paint, respecting all details on the surface. Perfect for glazes and other techniques, making them adequate for experts and amateurs alike. Designed especially for brush painting, but Acrylic Color paints can be used with an airbrush when slightly diluted with Acrylic Thinner.

Non-toxic water-based with no latex. Shake well before use. Includes stainless steel mixing ball.

Contains: 17ml.

*This Paint may contain a protective seal, remove before use.