Acrylic paints with an opaque and smooth matt finish, especially designed for modelling and miniature painting. Formula curated and carefully developed by experienced artists using a new generation of pigments, the Acrylic Color range aims to provide a full spectrum of all basic tones and shades necessary for wargames, vehicles, miniatures and dioramas, as well as colours exclusive to GSW.

Rich in high quality pigments, these colours will leave a fine homogenous layer of fast drying paint, respecting all details on the surface. Perfect for glazes and other techniques, making them adequate for experts and amateurs alike. Designed especially for brush painting, but Acrylic Color paints can be used with an airbrush when slightly diluted with Acrylic Thinner.

Non-toxic water-based with no latex. Shake well before use. Includes stainless steel mixing ball.

Contains: 17ml.

*This Paint may contain a protective seal, remove before use.

A 6-inch Deep Strike rule for Rapid Deployment is a straight measuring stick with a curved exterior, made of methacrylate, measuring exactly six inches, the safety distance that certain miniatures must respect when entering the table from the reserve in Warhammer 40,000® when they have abilities that reduce the standard margin. This 100% compatible tool is cut from 3mm fluorescent methacrylate and is just the right thickness to slide between tightly packed scenery without moving it. Being a rigid piece—not a tape measure—it can be laid flat against a miniature's base and rotated to draw a perfect six-inch exclusion circle in any direction.

For those special Rapid Deployment rules in 10th edition, a unit can deploy “anywhere on the battlefield that is more than 6” horizontally from all enemy miniatures" during your Reinforcement Step. The distance is measured from base to base (or helmet to base on vehicles) on a horizontal plane—height is ignored—so a reliable six-inch gauge is essential.

During the game, the 6" rule speeds up deployment: touch one end with the nearest enemy base, pivot the piece to draw an invisible circle, and instantly locate the nearest legal drop point. Many players use it before starting, surrounding key targets to visualize no-go zones that the opponent will not be able to use on turn 2. The fixed length prevents accidental compression or stretching of a tape, giving both sides identical and verifiable measurements.

Since arguments over “eyeballing” six inches can delay tournaments, referees often recommend or even provide these rulers. A single fluorescent marker is easier to see than faint one-meter markings, so opponents can check distances at a glance instead of measuring multiple times. That consistency speeds up rounds and prevents a unit from ending up ⅛″ too close.

Any unit with Quick Deployment, Teleportation, Null Deployment, or other rules that specify 6″ benefits from the tool—for example, Blood Angels with Descent of Angels, T’au with Airborne Positioning, or Drukhari Raiders with Raid from the Skies. In addition, the six-inch border serves as a quick reference for Advance+Move combinations, reduced Heroic Intervention bubbles, and custom Target Control radii. All in all, the 6″ Rule is a small investment that pays for itself every time reinforcements arrive, keeping your deployments legal and conflict-free.

The GSW version looks like something out of a neon-lit sci-fi cockpit: laser-cut from transparent fluorescent methacrylate, it catches ambient light and glows around the edges, so the engraved markings remain clear even in dimly lit rooms. The 3 mm thickness keeps it perfectly rigid, while the polished bezel allows it to slide between grouped miniatures without scratching the paint.

Content: 1x

The Blast Markers and Templates for Wargames by Green Stuff World gives you everything you need in a single pack to measure area effects in your fantasy battles. Made from 3 mm laser-cut fluorescent acrylic, these templates shine bright on the tabletop under any lighting, and the laser markings are engraved for life, so they’ll never wear off.

It includes the classic 3″ and 5″ round templates, plus a flamer template to simulate flamethrowers, dragon breath, or cone-shaped spells. They’re 100% compatible with Warhammer: The Old World® and The 9th Age, where magic, war machines, and area attacks still scorch everything under the blast zone. Place it, measure it, and roll—if it’s under the template, it’s toast.

Also perfect for retro games like Warhammer Fantasy Battles® 6th to 8th Edition, and for veterans who still enjoy narrative play or old-school tournaments with classic rules. The engraved subdivisions help check partial coverage, multiple hits, and scatter—no unnecessary math.

Designed for both competitive and narrative players, these fluorescent acrylic templates are rigid, precise, easy to clean (resistant to glue, energy drinks, and even mini paint), and they look awesome on the battlefield.

If you use catapults, cannons, area spells, or anything that explodes in radius, this is the essential tool your fantasy wargaming kit was missing.

Fluorescent acrylic is non-porous, so splashes of paint, glue, Coca-Cola, or Monster wipe off easily with a cloth. If you want fast, accurate, tournament-proof measuring tools for spells, artillery, or blast effects, this set is exactly what you need in your miniature carry case.

Content: 3x

Unleash the fury of battle with our fearsome War Dogs compatible with Warhammer bits – highly detailed 3D printed resin miniatures that will bring an extra dose of brutality and realism to your battlefield, as well as to your scale models and dioramas. Whether patrolling the trenches of the grimdark Trench Crusade® universe, stalking the wastelands of Warhammer 40k®, or taking part in a narrative scene in a diorama, these war beasts are ready to fit perfectly into your armies and terrain.

Our online store specialises in high-quality miniatures and accessories, and these War Dogs are no exception. Each model is crafted with exceptional detail using next-generation ABS-like resin printing, capturing fur, fangs, harnesses, and armour with incredible realism that will make your modelling projects stand out.

Whether you use them as independent units, companions for your heroes, or narrative elements in your dioramas, these War Dogs are compatible with a wide range of miniature wargames, including Warhammer 40k®, Trench Crusade®, and many others. Perfect for customising your armies and giving them a unique and menacing touch.

They are perfect for 32 mm miniatures (1:48 scale) and are supplied unpainted so you can add your personal touch. Each set comes with its original easy-to-remove printing supports, making assembly quick and straightforward so you can start working on them right away.

Contents: 9x

Discover our new collection of magic effects printed in 3D resin, specially designed to bring your miniatures, dioramas, and fantasy or science fiction scenes to life. These 3D resin bits represent a wide variety of spells and elemental powers, from bursts of fire, ice, and electricity to toxic, arcane, or supernatural effects.

Each piece has been meticulously modeled to capture the dynamism of movement and the intensity of magic in full action. Their transparent design allows you to play with lighting, color, and shadows, achieving spectacular results with simple touches of paint, inks, or LED lighting effects.

Take advantage of their transparency and paint these special effects with intense inks, dipping inks, or fluorescent colors. These products enhance the internal brightness of the material and allow you to achieve truly spectacular luminous transitions and energy effects. By applying thin layers of color or combining different shades, you can simulate burning fire, sparkling ice, electric shocks, or toxic fumes with unique depth and luminosity.

Compatible with Warhammer 40k miniatures, specifically Nurgle, Tyranids, as well as other types of heroes, monsters, or scenarios from many other games, these effects are perfect for both modeling and wargame players looking to add drama, narrative, and visual dynamism to their armies. These resin bits are made of high-quality ABS-like resin, offering strength, definition, and excellent compatibility with modeling glues and paints.

Supplied unpainted, still attached to their printing sprue, and should be carefully removed before use. Perfect for wargaming miniatures from 28 to 54 mm (1:48–1:35 scale).

Contents: x22

Build the perfect battlefield for your medieval wargames and skirmish games with this pre-painted cardboard scenery set. Each piece is made of thick, sturdy cardboard, designed to be quickly and easily assembled and disassembled, making it easy to transport, store, and set up games in minutes.

The complex embossed details, variety of textures, and artistic design of the set allow you to realistically represent a devastated medieval city: collapsed walls blackened by fire, cracked planks, battle-scarred floors, broken tiles, worn bricks, functional doors that open and close, and even overgrown vegetation that adds depth to the scene. Each element has been carefully designed to offer an immersive setting that is ready to play right out of the box.

Scenery designed for skirmish games
Thanks to its modular structure and abundance of openings, walkways, upper floors, and elevated points, this set is ideal for skirmish games where verticality and tactical movement are essential. Units can climb ladders, move between houses using planks, or take cover behind half-collapsed walls while controlling lines of sight. The entire set is optimized for games where spatial decision-making is key.

Recommended for 1:48 scale (approx. 32 mm), this set is compatible with a wide variety of contemporary miniature wargames. Games where this type of scenery fits in particularly well include:

Mordheim (Games Workshop)
Frostgrave (North Star / Osprey Games)
Rangers of Shadow Deep
Song of Blades and Heroes
Epic Fantasy Skirmish
The Silver Bayonet
Any generic medieval or dark fantasy skirmish rules
Mordheim-compatible scenery
Mordheim is a classic skirmish game set in the world of Warhammer Fantasy, focusing on battles between gangs roaming a ruined city riddled with dangers. Vertical exploration, multiple cover options, dangerous terrain, and narrow spaces are essential elements of its gameplay.

For this reason, our Ruined City Set fits particularly well with the philosophy of the game: half-collapsed houses allow for ambushes, upper floors favor snipers and lookouts, and buildings connected by planks perfectly replicate the chaotic and dilapidated feel that characterizes the mythical City of the Damned.

In addition, the 1:48 scale provides an ideal proportion with most modern skirmish miniatures, allowing the game table to maintain a consistent, immersive, and highly functional look during play.

Contents:

8x Ruined Houses
6x Fences
5x Stairs
2x Plank Bridges
6x Stone Walls

GSW's Vivid Metal Colors series takes metallic finishes to another level, offering extraordinarily vivid, intense colors that are hard to find in the world of model making. These almost unique shades provide a striking metallic sheen thanks to their intense colors, adding a distinctive touch to any miniature, model, or scenery piece.

Formulated with the highest quality ultra-fine pigments, these pearl-based metallic paints provide a truly stunning metallic effect, guaranteeing professional results even on small or highly detailed surfaces. Their coverage, combined with fast drying, allows you to work comfortably and efficiently.

They can be combined with each other or with other paints and auxiliary products such as varnishes, although it is recommended to use gloss varnish, satin varnish, or our chrome varnish. They can also be combined with our range of Candy Inks or our range of Interference or Metal Filter paints:

They can be used together with candy inks, due to their high transparency and shine, acting as color filters on metallic surfaces, gems, crystals, or lights, allowing you to modify and enhance the base metallic tone without losing definition. By applying a very thin layer of ink to the already painted metal, you can achieve unique color variations—intensifying reds, greens, blues, or intermediate shades—for vibrant and deep visual effects.

They can also be used in conjunction with the range of metal filters, which provide reflections that change depending on the angle of the light, generating pearly or iridescent sparkles that transform the metallic finish into something much more dynamic. This combination allows you to create striking special effects, from armor with changing sparkles to details with an almost magical appearance, producing results that stand out both on the table and in the display case.

The Vivid Metal Color series is water-based and completely non-toxic, and is optimized for use with both brushes and airbrushes. For optimal performance with an airbrush, we recommend starting with a 1:1 dilution with acrylic thinner.

Each bottle includes a stainless steel ball to ensure a homogeneous mixture that is ready to use in seconds.

Contents: 1 x 17 ml

Dipping ink 60 ml

Dipping ink semi-transparent paints help you to shade your figures more quickly and easily over a single coat of paint. Apply with a brush over a layer of matt white or a light colour to easily achieve realistic shadows in a single application of Dipping.

The Dipping ink range is the best speedpainting solution on the market to contrast your miniatures and gain more time for the game.

It can also be used by advanced painters taking advantage of its unique properties to mark shadows and volumes, blend and veil colours with ease, bring out the details of your figure quickly and use it as a starting point for more professional painting.

These paints have been designed in a 60ml pot so that you have enough product to paint entire armies with ease.

Contents: 1x Dipping ink in 60ml

Dipping ink 60 ml

Dipping ink semi-transparent paints help you to shade your figures more quickly and easily over a single coat of paint. Apply with a brush over a layer of matt white or a light colour to easily achieve realistic shadows in a single application of Dipping.

The Dipping ink range is the best speedpainting solution on the market to contrast your miniatures and gain more time for the game.

It can also be used by advanced painters taking advantage of its unique properties to mark shadows and volumes, blend and veil colours with ease, bring out the details of your figure quickly and use it as a starting point for more professional painting.

These paints have been designed in a 60ml pot so that you have enough product to paint entire armies with ease.

Contents: 1x Dipping ink in 60ml

Oxidizing agent which activates the natural oxidization process of metals, generating porosities and natural rust. Brass photoetches will improve the grip of paints. Some natural rust could be toxic, it is recommended to varnish after oxidizing to seal the rust and avoid contact.

This effect will rust the pure metal pigments from the GreenStuffWorld range in a very natural way.

Contents

1x 17ml Oxidizer

Colouring dye for ultraviolet, epoxy and polyurethane resins. Not compatible with acrylic products.

For best results, we recommend adding a maximum of 5% dye to the mix, usually a drop or two would suffice. A thin dropper is included in the bottle for proper dosing.

All colour dyes can be mixed and matched to produce new colours.

Customise your miniatures with a touch of surreal gore with these quality resin plates, featuring blank creepy faces sculpted with a high level of detail. These faces have been designed especially for the bases of Kingdom Death, though their use extends to wherever your imagination takes them!

You can divide them into smaller pieces to decorate your bases or leave them as a whole to cover bigger surfaces.

Each set includes 2 plates in size 70x140mm.

Modular Paint Rack - WEDGE

Paint pot display made of high-quality MDF WOOD. Assembly for this display is quick and simple. In case you want to reinforce it, we recommend using standard PVA glue (wood glue). This set includes joiners to be able to join them with other modules on the left and on the right. It is also compatible with GSW drawer modules.

The inner holes will allow you to place the paint pots both standing and upside down. Product may exhibit scorch marks due to the manufacturing process.

Measurements: 45ºAngle x 20cm Width x 10cm Heigth
Capacity per combination: 

- 11x 17ml pots
- 6x 17ml pots + 5x 30/10/18ml
- 6x 17ml pots + 2x 30/10/18ml + 3x Rolling pins

* This item does not include any paintbrush or paint pots. This item must be assembled, but includes assembly instructions.