Neodymium Magnet is the strongest type of permanent magnet commercially available. They have replaced other types of magnet in the many applications in modern products that require strong permanent magnets.
The references N35 and N52 are a measurement for the quality of the magnet material. The higher the grade (the number following the 'N'), the stronger the magnet. These will explain two things: - How much "magnetic energy" per volume is contained in this magnet material - Up to what temperature the magnet can be used
Magnets that begin with an "N" should be used up to 80°C (176°F). The highest grade of neodymium magnet currently available is N52.
If you take any two magnets of different sizes and magnetisation from our range, the difference in their strength is more due to the differences in their volume than the differences in their magnetisation. That's why the larger magnet is mostly the stronger magnet, even when its magnetisation classification is somewhat smaller.
** Pull Forces: Expected pull forces based on extensive product testing. The Surface Field data is only valid for points along the center axis of the magnet, and assumes a single magnet in free space.
If you are planning to use them with wargames and miniatures we will recommend you as follows:
- Neodymium Magnet - 3x0.5mm, for exchanging weapons, heads, arms, etc ... - Neodymium Magnet - 3x1mm, for exchanging weapons, heads, arms, etc ... - Neodymium Magnet - 3x2mm, for plastic miniatures bases. - Neodymium Magnet - 5x2mm, for metal miniatures bases.
Chameleon metal paints will create a colourshift visual effect depending on the viewing angle. Valid for brush and airbrush. Best results will be obtained with Airbrush.
Made without animal products. Non edible.
Uses:Shake well and apply over BLACK basecoat. For the best effects, use gloss blackcoat so it will increase the effect. Semitransparent chameleon paints could also be applied over other basecoat colors to achieve different colorshift effects. Paint very very light coats till maximum colour shows up and basecoat is no longer visible. Each coat should be dried before applying the next coat. Use varnish only when paint is totally dried.
Contents:This set is including 6 acrylic COLORSHIFT Chameleon colors with ultra fine pigments. Non-Toxic Waterbased paint. Non-Flameable. No Latex.
This saline solution creates a whitish crystalline structure that simulates the effect of frost.Due to its natural composition, certain external factors such as humidity, temperature, and surface or structure where it's applied, can affect the formation of frost.
It can imitate the frost on trees, bushes, flowers, crystals and even imitate other crystalline formations.
Apply multiple layers and leave to dry between 4 to 24 hours. Subsequent applications could reactivate the crystallization process and make them grow. Can be cleaned with water if necessary.
The effects may differ depending on whether it is applied by brush or airbrush.In airbrushing it is recommended not to apply too thin layers since crystals will not form.It can be diluted with water but the crystals that form would be weaker.
Contains 17ml.
Warning
- The use of other products over the cured frost, such as paint, varnish or lacquer can affect the crystals. Once crystallized, if dampened, they could melt or simply weaken the crystals. Depending on the product used, they can crystallize again.
- Porous materials such as natural wood, MDF wood, cork, cardboard, etc can absorb the medium of the product, canceling the effect of the liquid frost. These materials must be sealed before applying the liquid frost.
- In the case of obtaining crystals, if you want to increase their hardness, you can use cyanoacrylate glue in liquid format and apply through capillarity (touch a small amount of fluid to the formation and allow it to flow in by itself, without touching the crystals with brush/nozzle etc). By doing this, some crystals may lose some detail if they are not well formed or attached. Using too much glue could release cyanoacrylate fumes.
- In case you want to dye the crystals, it should always be done with thin inks through capillarity, and it is recommended to fix them with the method above beforehand to affect their structure as little as possible.
These opaque fluorescent acrylic paints will make your miniatures and dioramas vividly colourful. They are characterised by their highly intense brightness, reaching maximum brightness over white paint.
In addition, they react and glow under ultraviolet/black light, offering an infinite number of creative possibilites.
Non-toxic. Valid for brush and airbrush.
Content: 1x 17ml bottle
Available in various colors.
*This Paint may contain a protective seal, remove before use.
These pinning rods may be used for miniature pinning and assembly, and also to create for example parts of structures, spears, banners, miniature parts, weapons ... and much more!
Very resistant, easy to bend, and easy to cut. These rods can conduct electricity.
Kneadatite Blue/Yellow Green Stuffis a room-temperature curing two-part epoxy putty sold either in tape format.
Mixing equal parts of the yellow 'filler' and blue 'hardener' produces a sticky green putty that feels a lot like chewed bubble gum. Once mixed, it has a worklife of 90 minutes, allowing time for shaping and detailing, reaching 'ultimate hardness' after 24 hours. Altering the mix with more blue or yellow component will produce a faster/slower and harder/softer cure.
We recommend to use a little lubricant to prevent Green Stuff from sticking. Normally water is enough but some people also use others such as Vaseline, petroleum jelly or even jhonson baby oil to get smooth surfaces. Keep wet fingers and tools to make easier the sculpting and modeling process. You may also add talcum powder to reduce the stickiness and avoid fingerprints.
This set contains 12 inches of material --> 30 cm.
Chameleon metal paints will create a colourshift visual effect depending on the viewing angle. Valid for brush and airbrush. Best results will be obtained with Airbrush.
Made without animal products. Non edible.
Uses:Shake well and apply over BLACK basecoat. For the best effects, use gloss blackcoat so it will increase the effect. Semitransparent chamaleon paints could also be applied over other basecoat colors to achieve different colorshift effects. Paint very very light coats till maximum colour shows up and basecoat is no longer visible. Each coat should be dried before applying the next coat. Use varnish only when paint is totally dried.
Contents:This offer includes an acrylic COLORSHIFT Chameleon color with ultra fine pigments. Non-Toxic Waterbased paint. Non-Flameable. No Latex.
Recover the tip of your used brushes and leave them as brand new. Water soluble and does not stain. Semi-transparent colour. Used at the end of the brush productions to give them the final touch.
Wet the tip of the brush on the gel, forming it with your fingers and let it dry about 10 minutes. Before repainting, wipe the tip of the brush a bit in water to soften it. Repeat the process after each painting session and your brushes will be always like new!
Blue Stuff sticks is a new generation of thermo plastic molding material wich can be reduced to mouldable conditions by inmmersion in hot water during 3 minutes.
It will allow you to create an instant mold of any piece you wanted by pressing the plastic material against the piece you want to have the mold made from. After that, make copies by using any kind of putty, polyester resins or even epoxy resins. Nothing will get stuck. REUSABLE plastic moulding for all levels.
New improved formulation that will allow you to have better details since the plastic will remain more time in soft state.
This set contains 4 bars and it will last for ever.
Dimension of each bar: 5.8x1.5x0.7cm Weight of each bar: 6 gr
Magnetic Sheets provide a quick and simple way of magnetising your fantasy wargames units on their movement trays. Use them alone or together with our Neodymium Magnets depending on the attraction strength needed. These 200mm x 300mm sheet provides enough material to make up to three 50-man movement trays or six 25 man trays (using 20mm bases) and can be cut to size easily with a pair of scissors or a craft knife.
These opaque fluorescent acrylic paints will make your miniatures and dioramas vividly colourful. They are characterised by their highly intense brightness, reaching maximum brightness over white paint.
In addition, they react and glow under ultraviolet/black light, offering an infinite number of creative possibilites.
Non-toxic. Valid for brush and airbrush.
Content: 1x 17ml bottle
Available in various colors.
*This Paint may contain a protective seal, remove before use.
Neodymium Magnet is the strongest type of permanent magnet commercially available. They have replaced other types of magnet in the many applications in modern products that require strong permanent magnets.
The references N35 and N52 are a measurement for the quality of the magnet material. The higher the grade (the number following the 'N'), the stronger the magnet. These will explain two things: - How much "magnetic energy" per volume is contained in this magnet material - Up to what temperature the magnet can be used
Magnets that begin with an "N" should be used up to 80°C (176°F). The highest grade of neodymium magnet currently available is N52.
If you take any two magnets of different sizes and magnetisation from our range, the difference in their strength is more due to the differences in their volume than the differences in their magnetisation. That's why the larger magnet is mostly the stronger magnet, even when its magnetisation classification is somewhat smaller.
** Pull Forces: Expected pull forces based on extensive product testing. The Surface Field data is only valid for points along the center axis of the magnet, and assumes a single magnet in free space.
If you are planning to use them with wargames and miniatures we will recommend you as follows:
- Neodymium Magnet - 3x0.5mm, for exchanging weapons, heads, arms, etc ... - Neodymium Magnet - 3x1mm, for exchanging weapons, heads, arms, etc ... - Neodymium Magnet - 3x2mm, for plastic miniatures bases. - Neodymium Magnet - 5x2mm, for metal miniatures bases.
MAGNET ATTRACTION COMBINATION
Movement Tray
Miniature
PLASTIC Minisattraction
METAL Minisattraction
Neodymium
Neodymium
Super High
Super High
Rubber Steel Sheet
Neodymium
High
High
Magnetic Sheet
Neodymium
Medium
Medium
Rubber Steel Sheet
Magnetic Sheet
Medium
Low
Magnetic Sheet
Magnetic Sheet
Low
Insufficient
* Using wrong Neodymium may reduce this strenght to the next lower level.
Extra fine-grained, water-based and fast-drying putty with an extra hard finish. Specially designed for modeling and perfect as a superfine filler due to its adhesion and sanding properties. Does not shrink when drying. Can be cleaned and thinned with water. Non toxic and non flammable.
Roll Makeris the ultimate tool to make all kind of tubes, tentacles, and wires to be used with any kind of putty or clay.
Depending on your sculpting material you may need to wet repeatedly the plates or your fingers with bit of water to reduce stickiness. Adding talcum powder to water may help with some putties like Green Stuff.
Use a toothbrush to clear any residue from plates if required, and never use wire brushes or metal implements since plates may be damages.
This set includes:
2 large plates 2 medium plates 2 small plates 2 guide bars. Use them to hold the plates and to get an extra 45º position for new textures.
Kneadatite Blue/Yellow Green Stuff is a room-temperature curing two-part epoxy putty sold either in tape format.
Mixing equal parts of the yellow 'filler' and blue 'hardener' produces a sticky green putty that feels a lot like chewed bubble gum. Once mixed, it has a worklife of 90 minutes, allowing time for shaping and detailing, reaching 'ultimate hardness' after 24 hours. Altering the mix with more blue or yellow component will produce a faster/slower and harder/softer cure.
We recommend to use a little lubricant to prevent Green Stuff from sticking. Normally water is enough but some people also use others such as Vaseline, petroleum jelly or even jhonson baby oil to get smooth surfaces. Keep wet fingers and tools to make easier the sculpting and modeling process. You may also add talcum powder to reduce the stickiness and avoid fingerprints.
Chameleon metal paints will create a colourshift visual effect depending on the viewing angle. Valid for brush and airbrush. Best results will be obtained with Airbrush.
Made without animal products. Non edible.
Uses:Shake well and apply over BLACK basecoat. For the best effects, use gloss blackcoat so it will increase the effect. Semitransparent chamaleon paints could also be applied over other basecoat colors to achieve different colorshift effects. Paint very very light coats till maximum colour shows up and basecoat is no longer visible. Each coat should be dried before applying the next coat. Use varnish only when paint is totally dried.
Contents:This offer includes an acrylic COLORSHIFT Chameleon color with ultra fine pigments. Non-Toxic Waterbased paint. Non-Flameable. No Latex.
Green Stuff World's range of synethic paintbrushes, GREEN SERIES. Expertly hand-crafted and designed to help you paint your armies and figures to an exceptional standard.
There are many brush types and sizes and each one has been designed for a different purpose.
Synthetic bristles are very similar to the natural hair bristles but are more suitable for less experienced painters or for techniques which require a less watered down medium, like dry brushing. Great for single stroke techniques, and generally any other technique that requires charging minimally diluted paint as the synthetic bristles absorb less water. For techniques such as washing, blending, layering and degrading that require a more diluted medium we suggest using our natural hair brushes.
Compared with natural hair brushes, synthetic hair brushes require less maintenance to maintain the shape of the tips. It is recommended to shape the bristles into a sharp point after use, and avoid leaving paint residue dry between the bristles. After painting, leave them standing up to avoid deforming the tips. Good maintenance of these brushes will ensure their longevity.
These opaque fluorescent acrylic paints will make your miniatures and dioramas vividly colourful. They are characterised by their highly intense brightness, reaching maximum brightness over white paint.
In addition, they react and glow under ultraviolet/black light, offering an infinite number of creative possibilites.
Non-toxic. Valid for brush and airbrush.
Content: 1x 17ml bottle
Available in various colors.
*This Paint may contain a protective seal, remove before use.
Set of round stainless steel cutters in the most frequent diamensions used to create bases as well as fillings of bases. That will allow you to cut clays and other materials quickly.
