Use the Green Stuff World UV torch with the Water Effects UV resin to quickly and easily simulate water on your miniatures, bases and scenery! 

The body of this flashlight is built of high-quality aluminium alloy, and it has a very solid construction. Internal wiring applies the high efficient booster circuit and can utilize the batteries in the largest extent. Excellent waterproof, suitable for outdoor environment, adverse weather conditions.

Specifictions:
Emitter Type: UV LED
WL (wave length): 385~400nm
Bulb Quantity: 12
LED Lifespan: 10,000 hours
Modes: 1
Battery Configuration: 3 x AAA batteries (NOT INCLUDED)
Input Voltage: 4.5 v
Runtime: About 4.5 hours
Switch Type: Clicky/Clickie
Switch Location: Tail-cap
Lens: Coated Glass Lens
Material: Aluminum Alloy
Body Color: black
Dimensions (L x Head Dia. x Body Dia.):3.8 x 1.1 x 1 inch /9.5 x 2.9 x 2.5cm
Weight: 63g / 1.94oz

Package Includes:
1 x 9 UV LED Ultra Violet 385~400nm Flashlight Torch ONLY

A one-step gel with crystal transparency, squeeze this product straight from the bottle onto your diorama or miniature base to create beautiful replicas of the sea, rivers, lakes, ponds or puddles. It has a multitude of advantages over other traditional ways of creating water effects:

• Ultrafast drying gel. This product can be combined with a UV Torch to dry in 2-4 minutes. On a sunny day, the gel has a drying time of 5-10 minutes. On a cloudy day, 20-40 minutes. 
• Can be dyed. The UV Resin can be mixed with any of our inks to dye the gel with only a few drops, allowing to create different types of water, such as bogged swamps or radioactive lakes!
• Doesn't shrink. The UV Resin doesn't shrink like other water replicating materials. The quantity of resin used is the quantity of resin you get when fully dried. 
• Multilayer friendly. In case you want to create the effect of submerging something in water, multiple layers can be placed on top of each other without leaving layer marks.
• Can be cut, polished and worked easily. The resin is easy to manipulate and can be shaped and carved however you want!
• Low smell and toxicity compared to more traditional methods.

Contains: 100ml

* When the resin is in its non-solid state you can use a heat gun or a kitchen lighter to heat the resin and force out any air bubbles that may have gotten caught in it.

* Keep in mind that the resin will remain in its gel state indefinitely until a source of natural light or ultraviolet light comes into contact with it.

* Do not expose the inside of the bottle to natural light, otherwise the gel could start a reaction and crystallize.

A one-step gel with crystal transparency, squeeze this product straight from the bottle onto your diorama or miniature base to create beautiful replicas of the sea, rivers, lakes, ponds or puddles. It has a multitude of advantages over other traditional ways of creating water effects:

• Ultrafast drying gel. This product can be combined with a UV Torch to dry in 2-4 minutes. On a sunny day, the gel has a drying time of 5-10 minutes. On a cloudy day, 20-40 minutes. 
• Can be dyed. The UV Resin can be mixed with any of our inks to dye the gel with only a few drops, allowing to create different types of water, such as bogged swamps or radioactive lakes!
• Doesn't shrink. The UV Resin doesn't shrink like other water replicating materials. The quantity of resin used is the quantity of resin you get when fully dried. 
• Multilayer friendly. In case you want to create the effect of submerging something in water, multiple layers can be placed on top of each other without leaving layer marks.
• Can be cut, polished and worked easily. The resin is easy to manipulate and can be shaped and carved however you want!
• Low smell and toxicity compared to more traditional methods.

Contains: 100ml

* When the resin is in its non-solid state you can use a heat gun or a kitchen lighter to heat the resin and force out any air bubbles that may have gotten caught in it.

* Keep in mind that the resin will remain in its gel state indefinitely until a source of natural light or ultraviolet light comes into contact with it.

* Do not expose the inside of the bottle to natural light, otherwise the gel could start a reaction and crystallize.

• Ultrafast drying gel. This product can be combined with a UV Torch to dry in 2-4 minutes. On a sunny day, the gel has a drying time of 5-10 minutes. On a cloudy day, 20-40 minutes. 
• Can be dyed. The UV Resin can be mixed with any of our inks to dye the gel with only a few drops, allowing to create different types of water, such as bogged swamps or radioactive lakes!
• Doesn't shrink. The UV Resin doesn't shrink like other water replicating materials. The quantity of resin used is the quantity of resin you get when fully dried. 
• Multilayer friendly. In case you want to create the effect of submerging something in water, multiple layers can be placed on top of each other without leaving layer marks.
• Can be cut, polished and worked easily. The resin is easy to manipulate and can be shaped and carved however you want!
• Low smell and toxicity compared to more traditional methods.

Contains: 100ml

* When the resin is in its non-solid state you can use a heat gun or a kitchen lighter to heat the resin and force out any air bubbles that may have gotten caught in it.

* Keep in mind that the resin will remain in its gel state indefinitely until a source of natural light or ultraviolet light comes into contact with it.

* Do not expose the inside of the bottle to natural light, otherwise the gel could start a reaction and crystallize.

GSW offers a brand new alternative for artists and modellers seeking to create toxic waste effects with this Ultraviolet Resin.  Composed with Lime Fluor, this product has the same properties as our Water Effect but has a radioactive green colour, perfect for creating fluorescent toxic substances or nuclear waste. Can be used by itself or with normal transparent UV Resin.

A one-stepgel, squeeze this product straight from the bottle onto your diorama or miniature.

• Ultrafast drying gel. This product can be combined with a UV Torch (LINK) to dry in 2-4 minutes. On a sunny day, the gel has a drying time of 5-10 minutes. On a cloudy day, 20-40 minutes. 
• Doesn't shrink. The UV Resin doesn't shrink. The quantity of resin used is the quantity of resin you get when fully dried. 
• Multilayer friendly. In case you want to create the effect of submerging something, multiple layers can be placed on top of each other without leaving layer marks.
• Can be cut, polished and worked easily. The resin is easy to manipulate and can be shaped and carved however you want!

Contains: 30ml

* When the resin is in its non-solid state you can use a heat gun or a kitchen lighter to heat the resin and force out any air bubbles that may have gotten caught in it.

* Keep in mind that the resin will remain in its gel state indefinitely until a source of natural light or ultraviolet light comes into contact with it.

* Do not expose the inside of the bottle to natural light, otherwise the gel could start a reaction and crystallize.

ml.