Product information being updated for help with this product or anything else please contact us. Full information for all products will be available again very soon.
This kit comprises 94 plastic components, and 1x Citadel Large Flying Base. This set also includes 1x Harlequins Transfer sheet containing 115 high-quality waterslide transfers to customise your miniature.
This multi-part plastic kit gives you everything necessary to build ten Blood Warriors. You’ll get some impressive customisation options - each can be armed with either a Goreaxe and Gorefist or two Goreaxes. One model can be built as Chaos Champion with a special, even more intimidating axe; this really is a kit for the axe-inclined among you! One model can be upgraded with a special weapon, the Goreglaive, and one can be built as an Icon Bearer. Includes ten Citadel 32mm Round Bases.
Daemons of Tzeentch: Herald of Tzeentch on Burning Chariot
3373
This multi-part plastic kit contains the components necessary to assemble a Burning Chariot of Tzeentch. This striking model is being dragged into battle by 2 straining Screamers of Tzeentch, leaving gouts of billowing flame in its wake. Atop the chariot, the Exalted Flamer is spitting forth a huge plume of flame, with 3 Blue Horrors revelling in the chaos with him. Along with this, there are the parts to assemble a Herald of Tzeentch on foot.
The kit comprises 49 components, and is supplied with a Citadel 120x92mm Oval base, with a Citadel 32mm Round base for the Herald of Tzeentch on foot. Also included are 3 Citadel 25mm Round bases for the Blue Horrors, and a Citadel 75x41mm Oval base allowing you to assemble the Exalted Flamer of Tzeentch on foot.
This kit can alternatively be used to assemble a Herald of Tzeentch on Burning Chariot, with an Exalted Flamer on foot.
This multi-part plastic kit contains the components necessary to assemble a set of 3 Deathshroud Bodyguard. Impressively large and dense, covered in rot, decay, tentacles and horror, these models exemplify the corrupting gift that Nurgle imparts. Each is armed with a manreaper – a large scythe, pitted and pockmarked with rust and disease, it stands even taller than the Deathshroud who brandish it – and a plaguespurter gauntlet, used to squirt unpleasant maladies at the unfortunate. Each of the three is bedecked with Nurgle symbolism, found in the rust, boils and chips in their armour, through which vile tentacled and bloated flesh poke, barely covered by ragged cloaks. there are 7 variant heads included, a mix of helmeted and bare, and an extra plaguespurter gauntlet – this is for an optional unit Champion, who has the option of wielding two of these.
The Deathshroud Bodyguard come as 51 components, and are supplied with 3 Citadel 40mm Round bases.
This multi-part plastic kit contains the components necessary to assemble Belisarius Cawl, Prime Conduit of the Omnissiah. Towering over his Adeptus Mechanicus brethren, he stands much taller than even other favoured Tech-Priests of the Omnissiah, with countless augmentations distorting his barely-human frame. He carries an Omnissian axe, which acts as a convenient mounting point for an array of sensors and his voice broadcasting unit, and an arc scourge – this arcane energy weapon is covered in cables, sensors and extra appendages.
This theme of augmentation is continued throughout – Cawl’s robes are not-quite covering a massive amount of robotic extensions, with several extra legs, prehensile arms and cables dragging along behind him. A scryerskull hovers above, and there are several symbols of the Machine God dotted about the miniature.
Belisarius Cawl comes as 42 components, and is supplied with a Citadel 105mm x 70mm Oval base.
Product information being updated for help with this product or anything else please contact us. Full information for all products will be available again very soon.
Product information being updated for help with this product or anything else please contact us. Full information for all products will be available again very soon.
This set contains everything you need to build one Chaos Rhino. You’ll have the option of equipping yours with a variety of weapons – including a combi-weapon or combi-bolter. This kit also comes with an upgrade sprue bedecked with spikes, railings and Chaos symbols, with plenty of spares for customising the rest of your Chaos models.
Product information being updated for help with this product or anything else please contact us. Full information for all products will be available again very soon.
The Stormraven Gunship is an armoured versatile craft that combines the role of dropship, armoured transport and strike craft.
This multi-part plastic kit contains 116 components including every option available for the Stormraven from heavy bolters, assault cannons and plasma cannons through to Bloodstrike missiles and a modified magna-grapple. The kit also comes will full interior detail, which can be painted prior to assembly, and a clear plastic cockpit window through which you can see the pilot and the turret gunner.
This kit contains one Stormraven Gunship, a Flying Stem and a Large Oval Base.
This box set contains one multi-part plastic Venerable Dreadnought. This 84-piece set includes: a plasma cannon, an assault cannon, lascannon, a heavy flamer, a storm bolter, two different power fists including an ornate one, and a set of smoke launchers. Also included are: two different sets of ornate leg guards, three different helmets, six purity seals, two different pennants, a range of different sarcophagus armour plates, several sarcophagus designs, and a host of Crux Terminatus and other Imperial icons.
The 5 man Space Marine Vanguard Veteran Squad are sculpted with a great sense of action and energy and contains a huge variety of weapon options with which to arm the unit.
When building the squad there are 5 different sets of running legs; 5 unique torso fronts; 16 different shoulder pads; 9 heads (8 helmeted, 1 bare); and 5 individual jump packs;
Every member of the squad can be armed with either chainsword and bolt pistol (each individual weapon bears a unique design); there are 4 sets of lightning claws; 4 pairs of thunder hammer and storm shield. The Sergeant has choice of relic blade, power sword, power fist or power axe; and there is also a grav pistol; a plasma pistol; a melta bomb; and a selection of frag and krak grenades.
The Space Marine range is designed so that all of the plastic parts can be swapped between different kits. Depending on how they are assembled, this box set can make hundreds of varieties of Vanguard Veterans. If you want your squad to include alternative shoulder pads, heads or weapons then grab them from any other Space Marine plastic kit and they’ll fit. This allows the opportunity for truly unique collections of miniatures.
This plastic kit contains 98 components with which to make a 5 man Space Marine Vanguard Veteran Squad (and so much more!).
This kit comes supplied unpainted and requires assembly - we recommend using Citadel Plastic Glue and Citadel Paints.
The crescent-shaped Necron Doom Scythe is an impressive model. It’s numerous, elegant panels are covered in Necron iconography, and there are numerous orbs and grills located around the model, and a spine-like engine. As well as a Necron pilot tucked away in the centre of the model, the weapons on the flyer include a twin-linked tesla destructor and a death ray set within a claw-like vice.
This multi-part plastic kit contains 51 components, a flying stem, large oval base and a Necron transfer sheet with which to build a Doom Scythe. This kit can be used optionally to build a Night Scythe.
This multi-part plastic boxed set contains 162 components with which to build three Necron Tomb Blades. This set comes with 2 small flying stems, 2 long flying stems, 3 small flying bases and 2 Necron transfer sheets.
Product information being updated for help with this product or anything else please contact us. Full information for all products will be available again very soon.
Product information being updated for help with this product or anything else please contact us. Full information for all products will be available again very soon.
Product information being updated for help with this product or anything else please contact us. Full information for all products will be available again very soon.
Retributor Armour Spray is a stunning gold-coloured spray paint that allows you to quickly and easily basecoat your miniatures with uniform coverage. Exactly the same colour as the Retributor armour pot, the highest-quality pigments available ensure a smooth, consistent and vibrant finish that will make your miniatures shine out from across any gaming hall.
Epic warfare is an inescapable part of the Star Wars™ universe, and you can lead your troops to victory with Star Wars: Legion™, a two-player miniatures game of thrilling infantry battles in the Star Wars universe! As a miniatures game, Star Wars: Legion invites you to enter the ground battles of the Galactic Civil War as the commander of a unique army filled with troopers, powerful vehicles, and iconic characters. While innovative mechanics for command and control simulate the fog of war and the chaos of battle, the game’s unpainted, easily assembled figures give you a canvas to create any Star Wars army you can imagine.
This multi-part plastic kit contains the components necessary to assemble a set of 3 Primaris Inceptors. Clad in Mk X power armour featuring a bulky jump pack – thrust-vectoring rocket engines mounted on the Space Marine’s back, enabling fast, bounding leaps to close on the foe at dizzying speed – they present a unique, easily recognisable silhouette. The jump pack itself and the blast shield cowl that protects the Inceptors’ heads from the immense heat of the pack’s rockets dominate the miniature, with posable fins, shock-absorbing devices attached to the boots and extra cabling and vents unique to this kit. The Inceptors can be armed with either 2 plasma exterminators each or 2 assault bolters each – the plasma exterminators are heavily shielded to provide protection against heat discharge and the assault bolters feature distinctive box magazines.
5 helmets are included, designed to be used with the blast shield cowl – no bare heads here, obviously! 3 blast shield helms are included and 4 purity seals – this includes 1 double seal used to distinguish the Sergeant.
The Inceptor squad come as 117 components, and are supplied with 3 Citadel 40mm Round bases, 3 45mm flying stems and an Ultramarines Infantry Transfer Sheet.
Product information being updated for help with this product or anything else please contact us. Full information for all products will be available again very soon.
This Colour Primer has a clear and crisp colour and is ideal for Space Marines, Daemons, Eldar, Lizards, Dragons or any army with a striking colour scheme. We advice a SOFT Tone or STRONG Quickshade for maximum result.
This multi-part plastic kit contains the components necessary to assemble a set of 10 Primaris Hellblasters. Clad in Mk X Tacticus power armour, they eschew the complex variations of wargear many of their battle-brothers carry, preferring instead to focus on and specialise in a single-armament specialism – plasma.
The models can be assembled as either a 10-man squad, a squad of 9 Hellblasters with a Sergeant or 2 separate 5-man squads, each with a Sergeant of their own. The whole squad can be armed with a host of plasma weaponry – there are 10 plasma incinerators included, with the components required to turn any of them into an assault plasma incinerator or heavy plasma incinerator, depending on your preference. The assault and heavy variants feature alternate muzzles, ammunition flasks and different cabling attaching the weapon to the Hellblasters’ backpack. There are 4 incinerators which are being carried rather than aimed; you have the option to arm 4 Hellblasters with plasma pistols in the other hand.
A problem (some call it a bonus…) of plasma weaponry is its tendency to overheat; there are several optional components reflecting this. Bare head options featuring nasty burns are included for the Sergeant, and there are bionic arms included, heavily implying lost limbs in plasma accidents. There are also plenty of pistol holsters, reliquaries, grenade sets and purity seals included.
The Hellblaster Squad come as 250 components, and are supplied with 10 Citadel 32mm Round bases and a transfer sheet.
