The Earth Federation Forces' mass-produced security-type Tech Proto, also used to maintain peace on Earth, is now part of Bandai's "30MM (30 Minutes Missions)" lineup!

• A large shield is included; new technology allows the shield's pattern to be reproduced in a single part.
• The visor can be displayed open or closed.
• The rear skirt can be attached to the back. 
  
• The armored version can be displayed in light armor by removing the armored parts.
• Articulated gimmicks are equipped in various locations.

The Portanova, a signature unit of Bandai's "30MM (30 Minutes Missions)" model-kit series, makes its long-awaited debut in full armor, returning to the battlefield armed with powerful weapons!

Intermediate armor is included that further enhances the customizability of the original Portanova. Upgrade it to full armor with the intermediate armor!

A rifle is included to enable bold action poses, even in full armor.

The tip of the axe is movable; combine it to create a large axe.

The axe and rifle can be mounted on the backpack.

The RoyRoy support mecha is also fully armored; additional joints allow for increased customization.

Some armor parts from the 30MM 1/144 Commander Optional Armor [for Portanova/Red] are included in new coloring. 

Order yours today!

[Set Contents]:

Armor parts (x1 set)

RoyRoy

Axes (x2)

Rifles (x2)

Gauntlets (x2)

These model-kits offer the high attention to detail you've come to expect from Bandai. This snap-together product can be easily assembled, making it very approachable for less experienced builders, but the final product does not reflect that simplicity.

30 Minutes Missions model kits exist in a parallel world several decades after the sudden appearance of an interspatial portal (Gate) in Earth's orbit, an event later known as the Sky Fall incident. While conflicts persisted worldwide, the introduction of a mecha weapon significantly altered modern combat tactics. The advent of the EXAMACS (Extended Armament & Module Assemble & Combine System) swiftly shifted the global military balance. As the year 2XXX neared its end, another interspatial portal (Gate) materialized in Earth's orbit, unleashing an alien species from the planet Byron, closely resembling Earthlings. The Byron Forces initiated attacks using their Portanova machines, similar to Earth's EXAMACS units. In response, warring nations united to form the Earth Alliance Forces, marking the onset of conflict between the Alliance Forces and the Byron Forces. Assemblable in 30 minutes, the runners are structured so that parts for each section are located close together, and the kits can be intuitively assembled from the top starting with the head, chest waist, and so on. This parts structure makes it shorter to assemble the kit compared to other plastic models.

Please Note:

• One 30MM Armored Core VI Fires of Rubicon Arquebus Corporation VP-40S is supplied, and some assembly may be required.

These model-kits offer the high attention to detail you've come to expect from Bandai. This snap-together product can be easily assembled, making it very approachable for less experienced builders, but the final product does not reflect that simplicity.

30 Minutes Fantasy is the newest plastic model kit release from Bandai, which features customizable mechs with a fantasy theme. The name refers to the claim that each kit can be completed in just 30 minutes, making them ideal for beginners or those with limited time. The models are typically pre-colored and snap together, allowing for a hassle-free building experience. The kits can also be combined with other elements from the 30 Minutes range. The line has mech figures styled as fantasy knights along with a range of option packs for 30 Minute style mechs, including armour for knights and paladins with shields, swords and other accessories.

Please Note:

• One 30MF Yoroi-Shinden Samurai Troopers (Ronin Warriors) Gai of the Heat is supplied, and some assembly may be required.

These model-kits offer the high attention to detail you've come to expect from Bandai. This snap-together product can be easily assembled, making it very approachable for less experienced builders, but the final product does not reflect that simplicity.

30 Minutes Fantasy is the newest plastic model kit release from Bandai, which features customizable mechs with a fantasy theme. The name refers to the claim that each kit can be completed in just 30 minutes, making them ideal for beginners or those with limited time. The models are typically pre-colored and snap together, allowing for a hassle-free building experience. The kits can also be combined with other elements from the 30 Minutes range. The line has mech figures styled as fantasy knights along with a range of option packs for 30 Minute style mechs, including armour for knights and paladins with shields, swords and other accessories.

Please Note:

• One 30MF Rosan Swordman is supplied, and some assembly may be required.

A new generation of super-deformed kits is here! The SD Cross Silhouette series allows you to choose between two different inner frames that will change the proportions of your kits. You can choose between the cuter look of the SD (Super Deformed) frame, or the taller and more action-packed look of the CS (Cross Silhouette) frame!

Shin Getter from “Getter Robo” gets his own SD Cross Silhouette kit! He’ll be highly posable on completion, and he’s armed with his massive Getter Tomahawk and Getter Battle Wing! Only the SD frame is included; the CS frame is sold separately. Order him today!

[Includes]:

Getter Tomahawk
Getter Battle Wing

A new generation of super-deformed kits is here! The SD Cross Silhouette series allows you to choose between two different inner frames that will change the proportions of your kits. You can choose between the cuter look of the SD (Super Deformed) frame, or the taller and more action-packed look of the CS (Cross Silhouette) frame!

Shin Getter from “Getter Robo” gets his own SD Cross Silhouette kit! He’ll be highly posable on completion, and he’s armed with his massive Getter Tomahawk and Getter Battle Wing! Only the SD frame is included; the CS frame is sold separately. Order him today!

[Includes]:

Getter Tomahawk
Getter Battle Wing

From Mobile Suit Z Gundam comes the Master Grade Ji-O, the large and imposing mobile suit controlled by Paptimus Sirocco, now faithfully recreated in the MG 1/100 lineup. The hidden arm gimmick is fully reproduced, with movable fingertips and a range of motion that extends through to the base of the apron - a satisfying mechanical feature that captures one of the Ji-O's most distinctive characteristics.

The heavy mobile suit feel is conveyed through legs built with a real sense of density, internal bone structure, and double-layered armor that gives the completed model genuine visual weight. Detailed surface work extends across the back of the armor, the neck, and the seat area, with no part of the body left as an afterthought. The beam saber stores neatly in the side armor, and a special panel decoration sticker is included alongside the standard marking and foil seals to help you finish the model to a high standard.

Accessories:

• Beam saber (stored in side armor)
• Molded runners - 22
• Foil seal
• Marking seal
• Gundam Decal
• Panel sticker
• Assembly instructions

• Unique Organic Design: True to Mamoru Nagano's style, the kit reproduces the intricate curves and tapered hands characteristic of the original Mobile Suit.
• Funnel system: The rear compartment (Tail Binder) is functional and houses the 10 removable "Funnel" units, allowing you to recreate the iconic attacks from a distance.
• Premium finish: Parts are injected in a deep gloss red, complemented by yellow and black accents that require no painting for a superb finish.
• Shoulder joints: The four huge shoulder binders are mounted on sturdy joints, allowing the model to be displayed in flight mode or in an imposing combat stance.

This is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.

From Mobile Suit Gundam ZZ, the mighty Full Armor ZZ Gundam Ver.Ka arrives under the full supervision of Hajime Katoki! This kit captures the overwhelming power of the MS while maintaining sleek proportions and flexible articulation.

• Multiple configurations – Rearrange the additional armor to equip the massive Hyper Mega Cannon, or remove the armor to recreate the Enhanced ZZ Gundam

• Streamlined design – Armor parts are finely adjusted to fit the body without adding bulk

• Weapon versatility – The Double Beam Rifle can be mounted on the forearm or held in hand, while the Hyper Mega Cannon attaches to the backpack via replacement parts

• Smart mechanics – A roll mechanism in the forearm allows smooth movement without armor interference

Set Includes:
• Double Beam Rifle ×1
• Hyper Mega Cannon ×1
• Beam Sabers ×2
• Shields ×2
• Fingertip parts ×1 set
• Lead wire ×1
• Stickers ×1
• Water transfer decals ×1

Crack into the Vendetta Vault!

This bundle contains a variety of contents that are perfect to compliment a growing Riftbound collection. Packaged in a card storage box, inside you’ll find 6 Booster Packs from Riftbound Set 4: Vendetta, 36 basic runes to power your decks, and 3 double-sided full-art tokens.

Shen or Zed: Whose blade is deadliest?

Raised as brothers in the Kinkou Order and driven apart by betrayal, Shen leads their old school while Zed is their greatest opponent. They both dedicate their lives to the blade, but their playstyles are worlds apart.

Vendetta, the fourth set of Riftbound: League of Legends TCG, brings even more Champions to the battlefield!

These 14-card booster packs pull from a pool of over 160 cards, with more than 50 Showcase cards! This set adds a new edge to Riftbound with new Legends, powerful cards, new mechanics, and for the first time, new domain combinations!

The Rift awaits – are you ready?