MDF BASES - AOS OVAL 75x46mm 

Top quality MDF bases for mounting wargames figures.

MDF BASES - OVAL 90x120mm 

Top quality MDF bases for mounting wargames figures.

MDF BASES - OVAL/Pill 25x70mm 

Top quality MDF bases for mounting wargames figures.

Neodymium Magnets

Diameter: 3mm (1/8)
Thickness: 1mm (1/32')
Quantity: 100

Magnetisation: N52
Pull Forces: 126gr (magnet to magnet) **
Material: NdFeB
Coating: Nickel Plated (Ni-Cu-Ni)

Neodymium Magnet is the strongest type of permanent magnet commercially available. They have replaced other types of magnet in the many applications in modern products that require strong permanent magnets.

The references N35 and N52 are a measurement for the quality of the magnet material. The higher the grade (the number following the 'N'), the stronger the magnet. These will explain two things:
- How much "magnetic energy" per volume is contained in this magnet material
- Up to what temperature the magnet can be used

Magnets that begin with an "N" should be used up to 80°C (176°F).
The highest grade of neodymium magnet currently available is N52. 

If you take any two magnets of different sizes and magnetisation from our range, the difference in their strength is more due to the differences in their volume than the differences in their magnetisation. That's why the larger magnet is mostly the stronger magnet, even when its magnetisation classification is somewhat smaller.

** Pull Forces: Expected pull forces based on extensive product testing. The Surface Field data is only valid for points along the center axis of the magnet, and assumes a single magnet in free space.

If you are planning to use them with wargames and miniatures we will recommend you as follows: 

- Neodymium Magnet - 3x0.5mm, for exchanging weapons, heads, arms, etc ... 
- Neodymium Magnet - 3x1mm, for exchanging weapons, heads, arms, etc ... 
- Neodymium Magnet - 3x2mm, for plastic miniatures bases.
- Neodymium Magnet - 5x2mm, for metal miniatures bases.

Neodymium Magnets

Diameter: 3mm (1/8')
Thickness: 2mm (1/12')
Quantity: 100

Magnetisation: N35
Pull Forces: 190gr (magnet to magnet) **
Material: NdFeB
Coating: Nickel Plated (Ni-Cu-Ni)

Neodymium Magnet is the strongest type of permanent magnet commercially available. They have replaced other types of magnet in the many applications in modern products that require strong permanent magnets.

The references N35 and N52 are a measurement for the quality of the magnet material. The higher the grade (the number following the 'N'), the stronger the magnet. These will explain two things:
- How much "magnetic energy" per volume is contained in this magnet material
- Up to what temperature the magnet can be used

Magnets that begin with an "N" should be used up to 80°C (176°F).
The highest grade of neodymium magnet currently available is N52. 

If you take any two magnets of different sizes and magnetisation from our range, the difference in their strength is more due to the differences in their volume than the differences in their magnetisation. That's why the larger magnet is mostly the stronger magnet, even when its magnetisation classification is somewhat smaller.

** Pull Forces: Expected pull forces based on extensive product testing. The Surface Field data is only valid for points along the center axis of the magnet, and assumes a single magnet in free space.

If you are planning to use them with wargames and miniatures we will recommend you as follows: 

- Neodymium Magnet - 3x0.5mm, for exchanging weapons, heads, arms, etc ... 
- Neodymium Magnet - 3x1mm, for exchanging weapons, heads, arms, etc ... 
- Neodymium Magnet - 3x2mm, for plastic miniatures bases.
- Neodymium Magnet - 5x2mm, for metal miniatures bases.

Neodymium Magnets

Diameter: 5mm (3/16')
Thickness: 2mm (1/12')
Quantity: 100

Magnetisation: N35
Pull Forces: 450gr (magnet to magnet) **
Material: NdFeB
Coating: Nickel Plated (Ni-Cu-Ni)

Neodymium Magnet is the strongest type of permanent magnet commercially available. They have replaced other types of magnet in the many applications in modern products that require strong permanent magnets.

The references N35 and N52 are a measurement for the quality of the magnet material. The higher the grade (the number following the 'N'), the stronger the magnet. These will explain two things:
- How much "magnetic energy" per volume is contained in this magnet material
- Up to what temperature the magnet can be used

Magnets that begin with an "N" should be used up to 80°C (176°F).
The highest grade of neodymium magnet currently available is N52. 

If you take any two magnets of different sizes and magnetisation from our range, the difference in their strength is more due to the differences in their volume than the differences in their magnetisation. That's why the larger magnet is mostly the stronger magnet, even when its magnetisation classification is somewhat smaller.

** Pull Forces: Expected pull forces based on extensive product testing. The Surface Field data is only valid for points along the center axis of the magnet, and assumes a single magnet in free space.

If you are planning to use them with wargames and miniatures we will recommend you as follows: 

- Neodymium Magnet - 3x0.5mm, for exchanging weapons, heads, arms, etc ... 
- Neodymium Magnet - 3x1mm, for exchanging weapons, heads, arms, etc ... 
- Neodymium Magnet - 3x2mm, for plastic miniatures bases.
- Neodymium Magnet - 5x2mm, for metal miniatures bases.

For more information please get in touch

For more information please get in touch

Kneadatite Blue/Yellow Green Stuff is a room-temperature curing two-part epoxy putty sold either in bar format. 

Mixing equal parts of the yellow 'filler' and blue 'hardener' produces a sticky green putty that feels a lot like chewed bubble gum. Once mixed, it has a worklife of 90 minutes, allowing time for shaping and detailing, reaching 'ultimate hardness' after 24 hours. Altering the mix with more blue or yellow component will produce a faster/slower and harder/softer cure.

We recommend to use a little lubricant to prevent Green Stuff from sticking. Normally water is enough but some people also use others such as Vaseline, petroleum jelly or even jhonson baby oil to get smooth surfaces. Keep wet fingers and tools to make easier the sculpting and modeling process.

You may also add talcum powder to reduce the stickiness and avoid fingerprints.

This Set includes 100 gr. of material in Bar format.

These pinning rods may be used for miniature pinning and assembly, and also to create for example parts of structures, spears, banners, miniature parts, weapons ... and much more!

Very resistant, easy to bend, and easy to cut. These rods can conduct electricity.

These pinning rods may be used for miniature pinning and assembly, and also to create for example parts of structures, spears, banners, miniature parts, weapons ... and much more!

Very resistant, easy to bend, and easy to cut. These rods can conduct electricity.

These pinning rods may be used for miniature pinning and assembly, and also to create for example parts of structures, spears, banners, miniature parts, weapons ... and much more!

Very resistant, easy to bend, and easy to cut. These rods can conduct electricity.

These pinning rods may be used for miniature pinning and assembly, and also to create for example parts of structures, spears, banners, miniature parts, weapons ... and much more!

Very resistant, easy to bend, and easy to cut. These rods can conduct electricity.

Professional Tweezers for precision and accurate tasks.

Use when setting tiny magnets, making jewelry, setting stones, designing jewelry, repairing watches and more.
They are lightweight and comfortable to hold while using them. They are 100% anti magnetic.

Properties: 
- 100% Anti-magnetic 
- Made of non-corrosive stainless steel
- Anti-acid

Roll Maker is the ultimate tool to make all kind of tubes, tentacles, and wires to be used with any kind of putty or clay.

Depending on your sculpting material you may need to wet repeatedly the plates or your fingers with bit of water to reduce stickiness. Adding talcum powder to water may help with some putties like Green Stuff.

Use a toothbrush to clear any residue from plates if required, and never use wire brushes or metal implements since plates may be damages.

Roll Maker XL will allow to make tentacles up to 75mm length without joints, and it also combinable with Roll Maker standard versión, since all plates are different in size. Guide bars are now stackable to allow you to make thicker pieces such us columns or trees.

This set includes:
2 large plates - XL Version
2 curved plates - XL Version
2 small plates - XL Version
2 STACKABLE guide bars. Use them to hold the plates and to get an extra 45º position for new textures.

Made of high quality clear durable rubber, very flexible and easy to use.
These molds allow you to create complex textures in a matter of seconds.

Heat resistant up to 80ºC
Plate size: 5x5 cm (2x2 inches)
Design: Chainmail
Texture Detail Size: 1mm (S)
Approximate scale: 1/65 (25mm) to 1/58 (28mm)

Contains 1 texture plate

Corrugater Tool

Corrugater Tool to corrugate metals.

Made of aluminum

Scale cutting mat is perfect for modeling, measuring, sculpting and general craft cutting and protecting surfaces from craft paints. This pack contains one high density doubleside cutting matt that will help cut the perfect angle and size every time. Due to the high density material, the matt will prevent blades from slipping, which will give you a better cut and will decrease the likeliness of injury.

On one side of the Mat are printe the guide lines of the most common scales, which will allow you to create armatures for sculpting miniatures of both men and women. On the other side you will finde the same scales and guide lines to create horses and warhorses armatures

Dimensions: 200mm x 300mm
Thickness: 3mm
Color: Black
Self Healing High Density PVC Material
Non slip doubleside matt

Excellent for removing sculpting putty remains from tools and textured rolling pins. Also used for weathering techniques such as Chipping-Mediums, Chipping Fluids, Hairspray Technique and others. Metal ferrule improves durability.

We recommend the use of metallic brush (brass or stainless steel) for a deep cleaning of your rolling pins.

This set contains 5 refills of stainless steel.

Large: 36mm