The GSW Ultimate Wet Palette is a next-generation painting palette designed to significantly extend the working time of acrylic paints compared to traditional palettes. By maintaining moisture beneath a semi-permeable membrane, it keeps your paints fresh and workable for days or even months, minimizing waste and maximizing efficiency during long painting sessions.

This Ultimate edition includes everything from the original one, plus two exclusive add-ons:

Drybrush Texture Palette – Manufactured in plastic, it has been specifically designed to help you load the perfect amount of paint onto your brush for drybrushing techniques. It allows for greater control, improved consistency, and cleaner results when highlighting miniatures or creating weathered effects. It’s also easy to clean and built to last.
Flexible Push-Pop Mixing Palette – Made from high-quality flexible silicone, this innovative article features soft wells that let you mix metallic paints, inks, or washes with ease. When you're done, simply press from underneath to pop out any leftover dried paint, making cleanup effortless. Its non-stick surface ensures minimal waste and quick color changes, making it ideal for both studio work and travel.
Hydro Paper: Sulphurized semi-permeable paper with high-strength grammage and a semi-translucent finish. It permits the absorption of water without letting paint through. Has right-angled corners. Size:130x180mm
Hydro Foams: High-performance hydro foam pads. High-thickness hydrophilic foam for increased fluid retention, whilst preventing wrinkles when drying out. Treated by Sanitized® to prevent mould and impurities, ensuring their longevity and capability to be reused. This treatment is not infinite, so it will lose effectiveness against fungi with time, water changes, and high temperatures. There is no minimum or maximum date from which the fungi will be generated, but good conservation will extend their effectiveness for many months. Size:125x175mm
An elastic band is included to securely hold the container shut during transport or storage, preventing spills and keeping contents intact.
Perfect for acrylic paints, this article is especially useful in hot or dry climates, where paint tends to dry out quickly. Whether you're painting miniatures, models, or wargaming terrain, this upgraded version gives you a professional-grade solution at just a slightly higher price than the standard version.

Suitable only for acrylic paints. It is ideal for warm and dry environments.

Size: 182x132mm (useful work area)

Contains:

1x original Wet palette 132x182mm
1x Drybrush texture palette 130x180mm
1x Push-Pop Mixing Palette 130x180mm
50-sheet refill of Sulphurized semi-permeable paper 130x180mm
2 Sanitized® treated sponges in White color 125x175mm
1 Elastic band
Complete instruction manual with tips and tricks

The GSW Ultimate Wet Palette is a next-generation painting palette designed to significantly extend the working time of acrylic paints compared to traditional palettes. By maintaining moisture beneath a semi-permeable membrane, it keeps your paints fresh and workable for days or even months, minimizing waste and maximizing efficiency during long painting sessions.

This Ultimate edition includes everything from the original one XL, plus two exclusive add-ons:

Drybrush Texture Palette – Manufactured in plastic, it has been specifically designed to help you load the perfect amount of paint onto your brush for drybrushing techniques. It allows for greater control, improved consistency, and cleaner results when highlighting miniatures or creating weathered effects. It’s also easy to clean and built to last.
Flexible Push-Pop Mixing Palette – Made from high-quality flexible silicone, this innovative article features soft wells that let you mix metallic paints, inks, or washes with ease. When you're done, simply press from underneath to pop out any leftover dried paint, making cleanup effortless. Its non-stick surface ensures minimal waste and quick color changes, making it ideal for both studio work and travel.
Hydro Paper: Sulphurized semi-permeable paper with high-strength grammage and a semi-translucent finish. It permits the absorption of water without letting paint through. Has right-angled corners. Size:180x270mm
Hydro Foams: High-performance hydro foam pads. High-thickness hydrophilic foam for increased fluid retention, whilst preventing wrinkles when drying out. Treated by Sanitized® to prevent mould and impurities, ensuring their longevity and capability to be reused. This treatment is not infinite, so it will lose effectiveness against fungi with time, water changes, and high temperatures. There is no minimum or maximum date from which the fungi will be generated, but good conservation will extend their effectiveness for many months. Size: 175x265mm.
An elastic band is included to securely hold the container shut during transport or storage, preventing spills and keeping contents intact.
Perfect for acrylic paints, this article is especially useful in hot or dry climates, where paint tends to dry out quickly. Whether you're painting miniatures, models, or wargaming terrain, this upgraded version gives you a professional-grade solution at just a slightly higher price than the standard version.

Suitable only for acrylic paints. It is ideal for warm and dry environments.

Size: 190x280mm (useful work area)

Contains:

1x original Wet palette XL 190x280mm
1x Drybrush texture palette 130x180mm
1x Push-Pop Mixing Palette 130x180mm
50-sheet refill of Sulphurized semi-permeable paper 180x270mm
2 Sanitized® treated sponges in White color 175x265mm
1 Elastic band
Complete instruction manual with tips and tricks

Meet the Green Stuff World Battlefield Token Set—purpose-built to be fully compatible with Warhammer 40k tokens, 10th-Edition match play, and fully WTC-legal. The bundle contains 35 full-colour, double-sided markers on premium cardstock, each topped with a crystal-clear self-adhesive epoxy dome. The domes add tactile depth, protect the artwork from wear and spills, and make every token catch the light so it’s easy to spot across a crowded tournament table. The rigid epoxy face also means tokens won’t warp or fray like untreated cardboard, and the slight dome makes them easy to pick up, even in the tightest ruins.

The set is engineered around the most common status checks in games such as WTC tournament games and Warhammer 40k®:

Take Action × 6 – drop one next to units performing Mission or Secondary actions.
Battle-shock × 6 – flag units that failed Leadership, so you don’t forget OC 0 or Stratagem lock-out.
Advance × 6 – mark models that ran this turn and can’t charge.
Secured Objective × 6 – a quick, visual “this objective is mine” confirmation.
Fired × 11 – place as you shoot to prevent double-dipping and speed up big gunlines.
At competitive events—especially the World Team Championship—clean, unambiguous game states are mandatory. Using dedicated markers eliminates “I thought that unit hadn’t advanced” arguments and shaves minutes off each round, helping you finish within the chess clock. The vivid artwork follows the icon colour cues found in the 10th Edition core book, so opponents immediately understand what each marker means.

Whether you’re drilling reps for your next Rogue Trader Tournament or flying out to the WTC, these fully compatible Warhammer 40k tokens are the fastest way to keep track of actions, prevent mistakes, and keep the dice rolling—legally, visibly, and at full speed.

Content: 35x

The item comes with 35 transparent self-adhesive epoxy domes, not attached to the 35 cardboard pieces.

A 6-inch Deep Strike rule for Rapid Deployment is a straight measuring stick with a curved exterior, made of methacrylate, measuring exactly six inches, the safety distance that certain miniatures must respect when entering the table from the reserve in Warhammer 40,000® when they have abilities that reduce the standard margin. This 100% compatible tool is cut from 3mm fluorescent methacrylate and is just the right thickness to slide between tightly packed scenery without moving it. Being a rigid piece—not a tape measure—it can be laid flat against a miniature's base and rotated to draw a perfect six-inch exclusion circle in any direction.

For those special Rapid Deployment rules in 10th edition, a unit can deploy “anywhere on the battlefield that is more than 6” horizontally from all enemy miniatures" during your Reinforcement Step. The distance is measured from base to base (or helmet to base on vehicles) on a horizontal plane—height is ignored—so a reliable six-inch gauge is essential.

During the game, the 6" rule speeds up deployment: touch one end with the nearest enemy base, pivot the piece to draw an invisible circle, and instantly locate the nearest legal drop point. Many players use it before starting, surrounding key targets to visualize no-go zones that the opponent will not be able to use on turn 2. The fixed length prevents accidental compression or stretching of a tape, giving both sides identical and verifiable measurements.

Since arguments over “eyeballing” six inches can delay tournaments, referees often recommend or even provide these rulers. A single fluorescent marker is easier to see than faint one-meter markings, so opponents can check distances at a glance instead of measuring multiple times. That consistency speeds up rounds and prevents a unit from ending up ⅛″ too close.

Any unit with Quick Deployment, Teleportation, Null Deployment, or other rules that specify 6″ benefits from the tool—for example, Blood Angels with Descent of Angels, T’au with Airborne Positioning, or Drukhari Raiders with Raid from the Skies. In addition, the six-inch border serves as a quick reference for Advance+Move combinations, reduced Heroic Intervention bubbles, and custom Target Control radii. All in all, the 6″ Rule is a small investment that pays for itself every time reinforcements arrive, keeping your deployments legal and conflict-free.

The GSW version looks like something out of a neon-lit sci-fi cockpit: laser-cut from transparent fluorescent methacrylate, it catches ambient light and glows around the edges, so the engraved markings remain clear even in dimly lit rooms. The 3 mm thickness keeps it perfectly rigid, while the polished bezel allows it to slide between grouped miniatures without scratching the paint.

Content: 1x

A 9-inch Deep Strike Ruler Template is a straight piece of measuring equipment with an arc-shaped exterior made of methacrylate that measures exactly nine inches—the critical clearance distance models must respect when they enter the table from reserves in Warhammer 40,000®. This 100% compatible tool is cut from 3 mm fluorescent acrylic and is 3mm thick, which is perfect to slip between tightly packed terrain pieces without disturbing them. Because the template is a single rigid piece rather than a tape measure, it can be laid flush against a model’s base and rotated to draw a perfect nine-inch exclusion zone in any direction. 

Under the 10th-edition Deep Strike template, a unit that starts the game in Reserves may be set up “anywhere on the battlefield that is more than 9" horizontally away from all enemy models” during your Reinforcements step. The distance is measured base-to-base (or hull-to-base for vehicles) in a flat plane—vertical height is ignored—so a reliable nine-inch gauge is indispensable for ensuring the requirement is met. 

In play, the template streamlines deployment: you touch one end to the nearest enemy model’s base, pivot the ruler to trace an invisible circle, and immediately know the closest legal drop-spot for your arriving unit. Many players also use the tool before the battle begins, placing it around key objectives to visualise “no-go” zones an opponent cannot Deep Strike into on turn two. The fixed length eliminates accidental over-compression or stretching that can occur with a flexible tape, providing both sides with identical, verifiable measurements. 

Because disputes about “eyeballing” nine inches are one of the most common slowdowns at tournaments, judges often recommend or even supply these templates. A single, brightly coloured ruler is far easier to spot across a busy table than the faint markings on a steel tape, so opponents can check and agree on distances at a glance instead of re-measuring multiple times. That consistency speeds up rounds and prevents feel-bad moments where a unit is later found to be ⅛″ too close and must be moved back.

Any unit with the Deep Strike, Teleport, Null Deployment, or similar keyword benefits from the ruler—Terminators, Sanguinary Guard, Tyranid Warriors with Tunnelling bugs, Tau Battlesuits with Manta-strike, Chaos Raptors, among many of them with this game rule. Beyond arrivals, the nine-inch edge doubles as a handy movement gauge for common actions such as Advance+Normal Move totals, Heroic Intervention bubbles, and Objective Control radii. In short, the Deep Strike Ruler Template is a small investment that pays off every time reserves hit the table, keeping your deployments legal, rapid, and controversy-free.

GSW’s 9-inch ruler template looks like it was lifted straight out of a neon-lit sci-fi cockpit: laser-cut from transparent fluorescent acrylic, it catches ambient light and glows along the edges, so the etched tick-marks remain crystal-clear even in low-key tournament halls. The 3 mm thickness keeps the tool perfectly rigid—no flexing or warping—while a polished, beveled edge lets you slide it between clustered models without snagging delicate paint jobs.

Content: 1x

A 6-inch Deep Strike rule for Rapid Deployment is a straight measuring stick with a curved exterior, made of methacrylate, measuring exactly six inches, the safety distance that certain miniatures must respect when entering the table from the reserve in Warhammer 40,000® when they have abilities that reduce the standard margin. This 100% compatible tool is cut from 3mm fluorescent methacrylate and is just the right thickness to slide between tightly packed scenery without moving it. Being a rigid piece—not a tape measure—it can be laid flat against a miniature's base and rotated to draw a perfect six-inch exclusion circle in any direction.

For those special Rapid Deployment rules in 10th edition, a unit can deploy “anywhere on the battlefield that is more than 6” horizontally from all enemy miniatures" during your Reinforcement Step. The distance is measured from base to base (or helmet to base on vehicles) on a horizontal plane—height is ignored—so a reliable six-inch gauge is essential.

During the game, the 6" rule speeds up deployment: touch one end with the nearest enemy base, pivot the piece to draw an invisible circle, and instantly locate the nearest legal drop point. Many players use it before starting, surrounding key targets to visualize no-go zones that the opponent will not be able to use on turn 2. The fixed length prevents accidental compression or stretching of a tape, giving both sides identical and verifiable measurements.

Since arguments over “eyeballing” six inches can delay tournaments, referees often recommend or even provide these rulers. A single fluorescent marker is easier to see than faint one-meter markings, so opponents can check distances at a glance instead of measuring multiple times. That consistency speeds up rounds and prevents a unit from ending up ⅛″ too close.

Any unit with Quick Deployment, Teleportation, Null Deployment, or other rules that specify 6″ benefits from the tool—for example, Blood Angels with Descent of Angels, T’au with Airborne Positioning, or Drukhari Raiders with Raid from the Skies. In addition, the six-inch border serves as a quick reference for Advance+Move combinations, reduced Heroic Intervention bubbles, and custom Target Control radii. All in all, the 6″ Rule is a small investment that pays for itself every time reinforcements arrive, keeping your deployments legal and conflict-free.

The GSW version looks like something out of a neon-lit sci-fi cockpit: laser-cut from transparent fluorescent methacrylate, it catches ambient light and glows around the edges, so the engraved markings remain clear even in dimly lit rooms. The 3 mm thickness keeps it perfectly rigid, while the polished bezel allows it to slide between grouped miniatures without scratching the paint.

Content: 1x

A 9-inch Deep Strike Ruler Template is a straight piece of measuring equipment with an arc-shaped exterior made of methacrylate that measures exactly nine inches—the critical clearance distance models must respect when they enter the table from reserves in Warhammer 40,000®. This 100% compatible tool is cut from 3 mm fluorescent acrylic and is 3mm thick, which is perfect to slip between tightly packed terrain pieces without disturbing them. Because the template is a single rigid piece rather than a tape measure, it can be laid flush against a model’s base and rotated to draw a perfect nine-inch exclusion zone in any direction. 

Under the 10th-edition Deep Strike template, a unit that starts the game in Reserves may be set up “anywhere on the battlefield that is more than 9" horizontally away from all enemy models” during your Reinforcements step. The distance is measured base-to-base (or hull-to-base for vehicles) in a flat plane—vertical height is ignored—so a reliable nine-inch gauge is indispensable for ensuring the requirement is met. 

In play, the template streamlines deployment: you touch one end to the nearest enemy model’s base, pivot the ruler to trace an invisible circle, and immediately know the closest legal drop-spot for your arriving unit. Many players also use the tool before the battle begins, placing it around key objectives to visualise “no-go” zones an opponent cannot Deep Strike into on turn two. The fixed length eliminates accidental over-compression or stretching that can occur with a flexible tape, providing both sides with identical, verifiable measurements. 

Because disputes about “eyeballing” nine inches are one of the most common slowdowns at tournaments, judges often recommend or even supply these templates. A single, brightly coloured ruler is far easier to spot across a busy table than the faint markings on a steel tape, so opponents can check and agree on distances at a glance instead of re-measuring multiple times. That consistency speeds up rounds and prevents feel-bad moments where a unit is later found to be ⅛″ too close and must be moved back.

Any unit with the Deep Strike, Teleport, Null Deployment, or similar keyword benefits from the ruler—Terminators, Sanguinary Guard, Tyranid Warriors with Tunnelling bugs, Tau Battlesuits with Manta-strike, Chaos Raptors, among many of them with this game rule. Beyond arrivals, the nine-inch edge doubles as a handy movement gauge for common actions such as Advance+Normal Move totals, Heroic Intervention bubbles, and Objective Control radii. In short, the Deep Strike Ruler Template is a small investment that pays off every time reserves hit the table, keeping your deployments legal, rapid, and controversy-free.

GSW’s 9-inch ruler template looks like it was lifted straight out of a neon-lit sci-fi cockpit: laser-cut from transparent fluorescent acrylic, it catches ambient light and glows along the edges, so the etched tick-marks remain crystal-clear even in low-key tournament halls. The 3 mm thickness keeps the tool perfectly rigid—no flexing or warping—while a polished, beveled edge lets you slide it between clustered models without snagging delicate paint jobs.

Content: 1x

The Blast Markers and Templates for Wargames by Green Stuff World gives you everything you need in a single pack to measure area effects in your fantasy battles. Made from 3 mm laser-cut fluorescent acrylic, these templates shine bright on the tabletop under any lighting, and the laser markings are engraved for life, so they’ll never wear off.

It includes the classic 3″ and 5″ round templates, plus a flamer template to simulate flamethrowers, dragon breath, or cone-shaped spells. They’re 100% compatible with Warhammer: The Old World® and The 9th Age, where magic, war machines, and area attacks still scorch everything under the blast zone. Place it, measure it, and roll—if it’s under the template, it’s toast.

Also perfect for retro games like Warhammer Fantasy Battles® 6th to 8th Edition, and for veterans who still enjoy narrative play or old-school tournaments with classic rules. The engraved subdivisions help check partial coverage, multiple hits, and scatter—no unnecessary math.

Designed for both competitive and narrative players, these fluorescent acrylic templates are rigid, precise, easy to clean (resistant to glue, energy drinks, and even mini paint), and they look awesome on the battlefield.

If you use catapults, cannons, area spells, or anything that explodes in radius, this is the essential tool your fantasy wargaming kit was missing.

Fluorescent acrylic is non-porous, so splashes of paint, glue, Coca-Cola, or Monster wipe off easily with a cloth. If you want fast, accurate, tournament-proof measuring tools for spells, artillery, or blast effects, this set is exactly what you need in your miniature carry case.

Content: 3x

The Blast Markers and Templates for Wargames by Green Stuff World gives you everything you need in a single pack to measure area effects in your fantasy battles. Made from 3 mm laser-cut fluorescent acrylic, these templates shine bright on the tabletop under any lighting, and the laser markings are engraved for life, so they’ll never wear off.

It includes the classic 3″ and 5″ round templates, plus a flamer template to simulate flamethrowers, dragon breath, or cone-shaped spells. They’re 100% compatible with Warhammer: The Old World® and The 9th Age, where magic, war machines, and area attacks still scorch everything under the blast zone. Place it, measure it, and roll—if it’s under the template, it’s toast.

Also perfect for retro games like Warhammer Fantasy Battles® 6th to 8th Edition, and for veterans who still enjoy narrative play or old-school tournaments with classic rules. The engraved subdivisions help check partial coverage, multiple hits, and scatter—no unnecessary math.

Designed for both competitive and narrative players, these fluorescent acrylic templates are rigid, precise, easy to clean (resistant to glue, energy drinks, and even mini paint), and they look awesome on the battlefield.

If you use catapults, cannons, area spells, or anything that explodes in radius, this is the essential tool your fantasy wargaming kit was missing.

Fluorescent acrylic is non-porous, so splashes of paint, glue, Coca-Cola, or Monster wipe off easily with a cloth. If you want fast, accurate, tournament-proof measuring tools for spells, artillery, or blast effects, this set is exactly what you need in your miniature carry case.

Content: 3x

Green Stuff World’s 3-6-9 Combat Ruler Pack gives you every core distance a modern tabletop general needs in one ultra-bright bundle. Three rulers—3″, 6″, and 9″—are laser-cut from 3 mm fluorescent acrylic, so their neon edges glow even under dim event-hall lighting. Laser markings are engraved on the surface, creating the numerals and the patterns.

The 3-inch ruler doubles as a multitool combat gauge: one face is subdivided at 1″, 2″, and 3″ to cover engagement range, pile-ins, heroic interventions, and aura widths at a glance. Use the dedicated 6-inch stick to verify standard infantry moves, secondary-objective bubbles, or rapid objective control. The 9-inch stick makes movements, deep-strike placements, redeploy stratagems, and deny-screens instant and error-free—lay it flat against an enemy base, pivot, and you have a perfect exclusion circle with zero tape-stretch guesswork.

Built for competitive play, the set is 100 % compatible with WTC and slots straight into Warhammer 40k 10th-edition mission packs—but the wargame rulers are just as handy in Age of Sigmar, Kill Team, Infinity, Star Wars Legion, Bolt Action, and any other inch-based system. Experienced captains know that fixed-length gauges speed rounds, prevent late-game measuring fatigue, and cut judge calls almost to zero. Casual gamers benefit too: clear neon edges and rigid bodies make it obvious to both players whether a model is in or out, stopping “was that within range?” debates before they start.

Fluorescent acrylic is non-porous, so spills from cola and energy-drink splashes wipe right off without harming the material. If you want measurements that are fast, accurate, and tournament-safe, the 3-6-9 Combat Ruler Pack is the slick, glow-bright solution your battle bag has been missing.

Content: 3x Distance gauges

Green Stuff World’s 3-6-9 Combat Ruler Pack gives you every core distance a modern tabletop general needs in one ultra-bright bundle. Three rulers—3″, 6″, and 9″—are laser-cut from 3 mm fluorescent acrylic, so their neon edges glow even under dim event-hall lighting. Laser markings are engraved on the surface, creating the numerals and the patterns.

The 3-inch ruler doubles as a multitool combat gauge: one face is subdivided at 1″, 2″, and 3″ to cover engagement range, pile-ins, heroic interventions, and aura widths at a glance. Use the dedicated 6-inch stick to verify standard infantry moves, secondary-objective bubbles, or rapid objective control. The 9-inch stick makes movements, deep-strike placements, redeploy stratagems, and deny-screens instant and error-free—lay it flat against an enemy base, pivot, and you have a perfect exclusion circle with zero tape-stretch guesswork.

Built for competitive play, the set is 100 % compatible with WTC and Warhammer 40k 10th-edition mission packs—but the wargame rulers are just as handy in Age of Sigmar, Kill Team, Infinity, Star Wars Legion, Bolt Action, and any other inch-based system. Experienced captains know that fixed-length gauges speed rounds, prevent late-game measuring fatigue, and cut judge calls almost to zero. Casual gamers benefit too: clear neon edges and rigid bodies make it obvious to both players whether a model is in or out, stopping “was that within range?” debates before they start.

Fluorescent acrylic is non-porous, so spills from cola and energy-drink splashes wipe right off without harming the material. If you want measurements that are fast, accurate, and tournament-safe, the 3-6-9 Combat Gauges Pack is the slick, glow-bright solution your miniature carry case has been missing.

Content: 3x Distance gauges

Green Stuff World's basic mission objective markers are transparent circles only 1 mm thick, featuring printed edges that precisely mark the mission zones on Warhammer 40k® and WTC-compatible tables. Each pack includes six markers: a 40 mm inner disc (base size) surrounded by a 3" scoring ring, all made from flexible, shatterproof glasspack plastic.

Thanks to their full transparency, they don’t break the immersion of your wargaming mat or create bumps that cause miniatures to wobble. The printed edge clearly shows where the control zone starts and ends, helping avoid arguments and speeding up OC (Objective Controlled) counting. The laser-etched edges work great on grey or dark mats, but they’re not ideal for very light-colored surfaces like snowy terrain, as the edges might blend with the background. Lightweight and stackable, they fit easily into any tournament miniatures case.

At deployment, drop the six discs where the mission map tells you; touch the 40 mm core to score, and the outer ring shows at a glance who’s within 3″. WTC events require markers to stay put even if terrain shifts, so the 1 mm profile and full transparency are perfect—no snagging scenery, no blocking movement.

Content: x6

Green Stuff World's Basic Mission Objective Markers are transparent discs just 1 mm thick with precision laser engraving. They clearly show both the outer boundary and the inner zone, marking exact mission locations on boards compatible with Warhammer® Kill Team. Each pack includes six markers: a 40 mm inner circle (base size) surrounded by a 1″ + 1″ scoring ring, all made from flexible, shatterproof glasspack plastic.

Being fully transparent, they don’t disrupt your killzone’s look or create steps where operatives might slip. The engraved line marks the exact 2″ Control Zone, speeding up APL checks and avoiding arguments about who controls the point. These markers are ideal for dark or grey game mats, though they’re less suited to very light backgrounds like snow-themed environments. Lightweight and stackable, they fit easily into any tournament case or Operatives box.

At setup, place the six discs where the mission map indicates. The moment an operative’s base tags the 40 mm hub, it can act, and the outer ring tells you at a glance who’s inside the 2″ bubble. Competitive packs insist the marker stays put even if terrain shifts, so the 1 mm profile is perfect for tight corridors, hatchways, or Into the Dark boards while your kill teams scrap for glory.

Content: x6

Unleash the fury of battle with our fearsome War Dogs compatible with Warhammer bits – highly detailed 3D printed resin miniatures that will bring an extra dose of brutality and realism to your battlefield, as well as to your scale models and dioramas. Whether patrolling the trenches of the grimdark Trench Crusade® universe, stalking the wastelands of Warhammer 40k®, or taking part in a narrative scene in a diorama, these war beasts are ready to fit perfectly into your armies and terrain.

Our online store specialises in high-quality miniatures and accessories, and these War Dogs are no exception. Each model is crafted with exceptional detail using next-generation ABS-like resin printing, capturing fur, fangs, harnesses, and armour with incredible realism that will make your modelling projects stand out.

Whether you use them as independent units, companions for your heroes, or narrative elements in your dioramas, these War Dogs are compatible with a wide range of miniature wargames, including Warhammer 40k®, Trench Crusade®, and many others. Perfect for customising your armies and giving them a unique and menacing touch.

They are perfect for 32 mm miniatures (1:48 scale) and are supplied unpainted so you can add your personal touch. Each set comes with its original easy-to-remove printing supports, making assembly quick and straightforward so you can start working on them right away.

Contents: 9x

Add a new level of realism and drama to your miniature bases, dioramas, and scenery elements with our set of high-quality resin hanging human skeletons, designed to bring tension, narrative, and atmosphere to any scene. This set includes skeletons hanging in different positions and without elements that limit them to a specific era or universe, making them totally versatile. Thanks to their level of detail, they are perfect for medieval fantasy dungeons, post-apocalyptic or futuristic settings, as well as historical battlefields or horror scenes.

Manufactured in ABS-like resin for 3D printers using state-of-the-art 3D printing, each piece reproduces bone textures, anatomical details, and natural wear with great precision, adding depth and realism to your projects.

These compatible Warhammer® bits are a perfect choice to complement miniature bases, custom scenery, and model decoration in games such as D&D®, Warhammer Fantasy®, The 9th Age, Warhammer 40k®, or the revamped Old World®, as well as any other historical or fantasy modeling project.

The set comes in unpainted resin, ready to customize with your own modeling techniques. It includes its printing matrix with easy-to-remove supports, making assembly quick and hassle-free. Whether you want to depict a dungeon full of lifeless remains, a modern battlefield with recent casualties, or a devastated futuristic landscape, these corpses will add a unique atmosphere to your creations.

To make the assembly and customization process easier for you, you'll also find a selection of essential modeling tools in our store. From modeling glue for gluing, model paints for painting, and ultra-flat precision modeling pliers, we have everything you need to give your pieces the perfect finish. These tools are specifically designed to work with resin and other surfaces used in model making, guaranteeing a precise cut and a clean assembly in every project.

Contents: 8x

Packs of MDF sheets are designed for those looking for reliable, high-quality wood materials for model making, scale models, and artistic work. Each wood sheet offers a smooth, uniform surface that facilitates precise cuts, defined contours, and impeccable finishes. In addition, its uniform structure guarantees dimensional stability, reducing deformation when working with paints, varnishes, or when temperature or humidity changes, while also being perfect for engraving or laser cutting and for CNC machines. Its uniform density allows for precise cuts and clean edges without splintering.

Available in different formats, these packs are suitable for both small creations and larger constructions. They are ideal for diorama bases, scenery, architectural models, game tiles, or even school projects. MDF wood is easy to sand and accepts a wide variety of finishing techniques—from primers to acrylic paints for model making—allowing for professional results without the need for special tools.

PVA glue is the most effective adhesive for MDF, as although the surface of this material is slightly porous, it is quickly absorbed, especially at the edges, creating strong bonds. The combination of these elements is ideal for assembling kits, structures, or terrain, and can be combined with cyanoacrylate to speed up the process without losing strength, achieving a durable and reliable bond in modeling and carpentry projects.

Contents: 2x
Dimensions: 200x200mm
Thickness: 3mm

Packs of MDF sheets are designed for those looking for reliable, high-quality wood materials for model making, scale models, and artistic work. Each wood sheet offers a smooth, uniform surface that facilitates precise cuts, defined contours, and impeccable finishes. In addition, its uniform structure guarantees dimensional stability, reducing deformation when working with paints, varnishes, or when temperature or humidity changes, while also being perfect for engraving or laser cutting and for CNC machines. Its uniform density allows for precise cuts and clean edges without splintering.

Available in different formats, these packs are suitable for both small creations and larger constructions. They are ideal for diorama bases, scenery, architectural models, game tiles, or even school projects. MDF wood is easy to sand and accepts a wide variety of finishing techniques—from primers to acrylic paints for model making—allowing for professional results without the need for special tools.

PVA glue is the most effective adhesive for MDF, as although the surface of this material is slightly porous, it is quickly absorbed, especially at the edges, creating strong bonds. The combination of these elements is ideal for assembling kits, structures, or terrain, and can be combined with cyanoacrylate to speed up the process without losing strength, achieving a durable and reliable bond in modeling and carpentry projects.

Contents: 2x
Dimensions: 250x250mm
Thickness: 3mm

Packs of MDF sheets are designed for those looking for reliable, high-quality wood materials for model making, scale models, and artistic work. Each wood sheet offers a smooth, uniform surface that facilitates precise cuts, defined contours, and impeccable finishes. In addition, its uniform structure guarantees dimensional stability, reducing deformation when working with paints, varnishes, or when temperature or humidity changes, while also being perfect for engraving or laser cutting and for CNC machines. Its uniform density allows for precise cuts and clean edges without splintering.

Available in different formats, these packs are suitable for both small creations and larger constructions. They are ideal for diorama bases, scenery, architectural models, game tiles, or even school projects. MDF wood is easy to sand and accepts a wide variety of finishing techniques—from primers to acrylic paints for model making—allowing for professional results without the need for special tools.

PVA glue is the most effective adhesive for MDF, as although the surface of this material is slightly porous, it is quickly absorbed, especially at the edges, creating strong bonds. The combination of these elements is ideal for assembling kits, structures, or terrain, and can be combined with cyanoacrylate to speed up the process without losing strength, achieving a durable and reliable bond in modeling and carpentry projects.

Contents: 2x
Dimensions: 200x300mm
Thickness: 3mm

Green Stuff World Acrylic Crystal Glue is a crystal-clear acrylic adhesive specially formulated for transparent parts and delicate materials. It offers strong bonding power with zero fogging or residue, making it the perfect choice for clear canopies, clear miniature bases, display cases, and other transparent components. It can also be used to fill small gaps between clear parts, as it dries completely invisible. Ideal for creating gems or realistic vehicle headlights after painting the inside with metallic silver or chrome paints.

Unlike cyanoacrylate glues, it does not release vapors that cause clouding, ensuring perfectly clean and polished joins every time. This acrylic-based modeling glue contains no solvents, making it safe for foam materials such as XPS or EPS without risk of melting or deformation. This adhesive is not suitable for bonding EVA foam materials.

Its low viscosity provides excellent flow and control, allowing for precise application even on small-scale parts. For best results, it is recommended to use fine glue applicator tips to achieve clean, accurate placement and avoid excess adhesive in delicate areas. The glue dries to a transparent, flexible finish that maintains clarity over time — it won’t yellow or lose transparency, even after years of use.

Because of its slower curing time (around one hour, depending on temperature and thickness), Crystal Glue gives users time to adjust parts into position before setting. This feature makes it ideal for modelers working on clear acrylic elements, resin dioramas, plastic kits, and airplane canopies, where perfect alignment and clean visual results are essential.

CONTENT: 1x 20gr

Discover our new collection of magic effects printed in 3D resin, specially designed to bring your miniatures, dioramas, and fantasy or science fiction scenes to life. These 3D resin bits represent a wide variety of spells and elemental powers, from bursts of fire, ice, and electricity to toxic, arcane, or supernatural effects.

Each piece has been meticulously modeled to capture the dynamism of movement and the intensity of magic in full action. Their transparent design allows you to play with lighting, color, and shadows, achieving spectacular results with simple touches of paint, inks, or LED lighting effects.

Take advantage of their transparency and paint these special effects with intense inks, dipping inks, or fluorescent colors. These products enhance the internal brightness of the material and allow you to achieve truly spectacular luminous transitions and energy effects. By applying thin layers of color or combining different shades, you can simulate burning fire, sparkling ice, electric shocks, or toxic fumes with unique depth and luminosity.

Ideal for customizing heroes, wizards, monsters, or entire scenes, these effects are perfect for both modeling and wargamers looking to add drama and visual storytelling to their miniatures. These resin bits are made of high-quality ABS-like resin, offering strength, definition, and excellent compatibility with modeling glues and paints.

Supplied unpainted, still attached to their printing sprue, and should be carefully removed before use. Perfect for wargaming miniatures from 28 to 54 mm (1:48–1:35 scale).

Contents: x22

Discover our new collection of magic effects printed in 3D resin, specially designed to bring your miniatures, dioramas, and fantasy or science fiction scenes to life. These 3D resin bits represent a wide variety of spells and elemental powers, from bursts of fire, ice, and electricity to toxic, arcane, or supernatural effects.

Each piece has been meticulously modeled to capture the dynamism of movement and the intensity of magic in full action. Their transparent design allows you to play with lighting, color, and shadows, achieving spectacular results with simple touches of paint, inks, or LED lighting effects.

Take advantage of their transparency and paint these special effects with intense inks, dipping inks, or fluorescent colors. These products enhance the internal brightness of the material and allow you to achieve truly spectacular luminous transitions and energy effects. By applying thin layers of color or combining different shades, you can simulate burning fire, sparkling ice, electric shocks, or toxic fumes with unique depth and luminosity.

Ideal for customizing heroes, wizards, monsters, or entire scenes, these effects are perfect for both modeling and wargamers looking to add drama and visual storytelling to their miniatures. These resin bits are made of high-quality ABS-like resin, offering strength, definition, and excellent compatibility with modeling glues and paints.

Supplied unpainted, still attached to their printing sprue, and should be carefully removed before use. Perfect for wargaming miniatures from 28 to 54 mm (1:48–1:35 scale).

Contents: x26

Discover our new collection of magic effects printed in 3D resin, specially designed to bring your miniatures, dioramas, and fantasy or science fiction scenes to life. These 3D resin bits represent a wide variety of spells and elemental powers, from bursts of fire, ice, and electricity to toxic, arcane, or supernatural effects.

Each piece has been meticulously modeled to capture the dynamism of movement and the intensity of magic in full action. Their transparent design allows you to play with lighting, color, and shadows, achieving spectacular results with simple touches of paint, inks, or LED lighting effects.

Take advantage of their transparency and paint these special effects with intense inks, dipping inks, or fluorescent colors. These products enhance the internal brightness of the material and allow you to achieve truly spectacular luminous transitions and energy effects. By applying thin layers of color or combining different shades, you can simulate burning fire, sparkling ice, electric shocks, or toxic fumes with unique depth and luminosity.

Ideal for customizing heroes, wizards, monsters, or entire scenes, these effects are perfect for both modeling and wargamers looking to add drama and visual storytelling to their miniatures. These resin bits are made of high-quality ABS-like resin, offering strength, definition, and excellent compatibility with modeling glues and paints.

Supplied unpainted, still attached to their printing sprue, and should be carefully removed before use. Perfect for wargaming miniatures from 28 to 54 mm (1:48–1:35 scale).

Contents: x38

Discover our new collection of magic effects printed in 3D resin, specially designed to bring your miniatures, dioramas, and fantasy or science fiction scenes to life. These 3D resin bits represent a wide variety of spells and elemental powers, from bursts of fire, ice, and electricity to toxic, arcane, or supernatural effects.

Each piece has been meticulously modeled to capture the dynamism of movement and the intensity of magic in full action. Their transparent design allows you to play with lighting, color, and shadows, achieving spectacular results with simple touches of paint, inks, or LED lighting effects.

Take advantage of their transparency and paint these special effects with intense inks, dipping inks, or fluorescent colors. These products enhance the internal brightness of the material and allow you to achieve truly spectacular luminous transitions and energy effects. By applying thin layers of color or combining different shades, you can simulate burning fire, sparkling ice, electric shocks, or toxic fumes with unique depth and luminosity.

Ideal for customizing heroes, wizards, monsters, or entire scenes, these effects are perfect for both modeling and wargamers looking to add drama and visual storytelling to their miniatures. These resin bits are made of high-quality ABS-like resin, offering strength, definition, and excellent compatibility with modeling glues and paints.

Supplied unpainted, still attached to their printing sprue, and should be carefully removed before use. Perfect for wargaming miniatures from 28 to 54 mm (1:48–1:35 scale).

Contents: x8

Discover our new collection of magic effects printed in 3D resin, specially designed to bring your miniatures, dioramas, and fantasy or science fiction scenes to life. These 3D resin bits represent a wide variety of spells and elemental powers, from bursts of fire, ice, and electricity to toxic, arcane, or supernatural effects.

Each piece has been meticulously modeled to capture the dynamism of movement and the intensity of magic in full action. Their transparent design allows you to play with lighting, color, and shadows, achieving spectacular results with simple touches of paint, inks, or LED lighting effects.

Take advantage of their transparency and paint these special effects with intense inks, dipping inks, or fluorescent colors. These products enhance the internal brightness of the material and allow you to achieve truly spectacular luminous transitions and energy effects. By applying thin layers of color or combining different shades, you can simulate burning fire, sparkling ice, electric shocks, or toxic fumes with unique depth and luminosity.

Compatible with Warhammer 40k miniatures, specifically Nurgle, Tyranids, as well as other types of heroes, monsters, or scenarios from many other games, these effects are perfect for both modeling and wargame players looking to add drama, narrative, and visual dynamism to their armies. These resin bits are made of high-quality ABS-like resin, offering strength, definition, and excellent compatibility with modeling glues and paints.

Supplied unpainted, still attached to their printing sprue, and should be carefully removed before use. Perfect for wargaming miniatures from 28 to 54 mm (1:48–1:35 scale).

Contents: x24