These model-kits offer the high attention to detail you've come to expect from Bandai. This snap-together product can be easily assembled, making it very approachable for less experienced builders, but the final product does not reflect that simplicity.

30 Minutes Missions model kits exist in a parallel world several decades after the sudden appearance of an interspatial portal (Gate) in Earth's orbit, an event later known as the Sky Fall incident. While conflicts persisted worldwide, the introduction of a mecha weapon significantly altered modern combat tactics. The advent of the EXAMACS (Extended Armament & Module Assemble & Combine System) swiftly shifted the global military balance. As the year 2XXX neared its end, another interspatial portal (Gate) materialized in Earth's orbit, unleashing an alien species from the planet Byron, closely resembling Earthlings. The Byron Forces initiated attacks using their Portanova machines, similar to Earth's EXAMACS units. In response, warring nations united to form the Earth Alliance Forces, marking the onset of conflict between the Alliance Forces and the Byron Forces. Assemblable in 30 minutes, the runners are structured so that parts for each section are located close together, and the kits can be intuitively assembled from the top starting with the head, chest waist, and so on. This parts structure makes it shorter to assemble the kit compared to other plastic models.

Please Note:

• One 30MM Armored Core VI Fires of Rubicon Arquebus Corporation VP-40S is supplied, and some assembly may be required.

This is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.

What a design! While the lineage is obvious it takes the Zeon style of design in a new direction. Well armed with two beam sabres and 12 1.3MW funnel remote beam weapons plus impressive speed and maneuverability it is a fantastic answer to the newer Gundams arrayed against it.

Bandai has struck MG gold yet again with this kit. In typical MG fashion EVERYTHING moves. From the head to the individual finger joints to the 10 funnel systems, each can be individually posed and removed. The shoulder armour opens just like the prototype. Opening cockpit area. Of course all parts are pre-coloured and assembly is literally a snap. However the appearance of the finished kit will be immeasurably improved by painting.

The 19 page instruction manual covers the design history of the AX-004 with line drawings. Color photos show painting details with paint mixing instructions. All text in Japanese.

This is a posable, high-grade injection-plastic kit of an item from the Gundam universe.

Designated with the number of the beast, NZ-666 Kshatriya is one devastatingly powerful Mobile Suit that's to be feared especially when it is equipped with multiple beam cannons on its chest and binders, as well as 24 funnels and four hidden arms underneath the binders. Nicknamed "The Sleeved," the Mobile Suit piloted by Neo-Zeon ace pilot Marida Cruz is represented in sharp detail as this snap-fit plastic kit model with parts molded in color and will stand 15.5cm tall upon completion. Its four binders are movable and feature a locking mechanism on each binder for maintaining them in fixed poses. There are six funnels underneath each binder along with a flexible arm. Includes two beam sabers and a sheet of foil stickers.

This is a posable, high-grade or better injection-plastic kit of an item from the Gundam universe.

Kit comes with a Beam Saber, Bazooka, Beam Rifle, and a shield.  Marking stickers are also  provided.

The RMS-106 Hizack (aka Hi-Zack) is a mass-production general-purpose mobile suit introduced in Mobile Suit Zeta Gundam. It was based on the MS-06 Zaku II series and was used by EFF groups, including the Titans, during the Gryps War.

HG 1/144 EB-06 Graze (Standard / Commander Type) - Iron-Blooded Orphans

The Precision Engineering of Gjallarhorn
Deploy the ultimate mass-produced mobile suit of the Post-Disaster era. At Dragoon Gaming, we are proud to offer the HG 1/144 Graze, the iconic workhorse of the Gjallarhorn forces from Mobile Suit Gundam: Iron-Blooded Orphans. Renowned for its industrial design and tactical versatility, the Graze is a favorite among builders for its sleek silhouette and the mechanical realism that defines the HGIBO line.

Advanced Internal Frame in 1/144 Scale
The HG Graze is a standout in the High Grade category due to its inclusion of a partial internal frame. This engineering choice allows for a level of articulation usually reserved for higher-tier kits, enabling the Graze to pull off deep lunges and dynamic ground-combat poses with ease. This 2-in-1 kit offers incredible value, providing the parts to build either the Standard Type or the Commander Type (featuring the specialized head antenna).

Why the HG Graze is a Must-Have:

• Selectable Build Options: Choose between the Standard grunt unit or the elite Commander variant using interchangeable head parts.

• Gundam Frame Ancestry: Features a highly detailed internal skeleton that showcases the mechanical "guts" of the Gjallarhorn military machine.

• Tactical Armament: Comes fully equipped with the GR-W01 120mm Rifle and the GR-H01 Battle Axe, which can be stored on the waist armor.

• Open-Sensor Gimmick: The head unit features an opening hatch that reveals the internal "eye" sensor for high-precision firing poses.

• Backpack Mobility: Features articulated thruster units on the back, allowing for atmospheric and space-type display configurations.

The awakened GQuuuuuuX has finally arrived! This striking Gunpla captures the unique design of the Endymion unit with detailed features, gimmicks, and accessories.

• Opening and closing head gimmick faithfully reproduced

• PET sheet effect parts recreate the unit’s distinctive energy effects

• Unique aircraft form designed with high accuracy

• Torso and hip articulation allow for dynamic and expressive posing

• Includes a wide variety of weapons and accessories for display options

Set Includes:
• PET sheet ×1
• Armed unit ×1 type
• Backpack ×1 set
• Interchangeable head part ×1
• Hand parts ×1 set
• Joint parts ×1
• Sticker ×1
• Marking sticker ×1

– From [Mobile Suit Gundam OO] [Gundam Kyrios] MG based on the latest draft of Mr. Takayuki Yanase!
– According to the original setting, adopt a common frame with some MG 1/100 Gundam Dunames.
– Reproduce the deformation to MA form by frame structure!
– By locking the shoulder armor and the nose of the backpack in the MA form, the form retention is strengthened and a stable display is possible.
– Hand parts reproduce the same deformation mechanism as animation. Hand parts can be bent inward while holding the wireless grip in MA mode.
– The GN beam submachine gun connected to the arm joint is replaceable.
– Wireless grip can be attached to two weapons as set.
– GN shield can be deployed. Furthermore, various poses are possible by rotating the connection.
– GN hand missile unit can also be equipped on the arm.

Set includes,
GN beam submachine gun x 1
GN hand missile unit x 2
Wireless grip x 2
GN beam saber x 2
GN shield x 1
Foil seal x 1
Marking seal x 1
PP sheet x1

This is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.

The MG 00 Raiser is an enormously popular Gundam Mobile Suit and Master Grade kit. Right on the heels of that release, Bandai seems to be trying to outdo themselves with the release of the Seven Sword /G. This is the same great kit as the 00 Raiser but instead of that big Raiser you get the Seven Sword /G and everything it entails. And that's a lot. GN Buster Sword II, GN Sword II Long and Short, GN Katar, GN Sword II Blaster. Yes, definitely a lot and on top of all this you get the marking stickers, the clear effect parts. Unlike the 00 Raiser, however, this kit does not come with a green LED. But now Bandai is selling those as well.

The gorgeous and ever-popular Wing Gundam gets the Master Grade Ver.Ka treatment!

Katoki Hajime's designs are unique and appealing; combined with Master Grade detail and engineering, this is one awesome Gunpla kit! With over 260 parts spanning over 13 runners, plus polycaps!

The usual foil stickers for eyes and other "glowing" parts are included, and also a sheet of clear "Gundam Stickers" with various warnings and markings on them; and of course Bandai's not forgotten their super-crisp rub-on dry transfers for the major designation markings!

Highly-poseable and heavily-armed, this beloved mobile suit also transforms into flight mode once completed.

Get yours today!

The Gelgoog Menace from “Mobile Suit Gundam Seed Freedom” is now a member of the HG model-kit lineup from Bandai! It’s equipped with the “Seed Action System” internal structure that specializes in reproducing impressive action poses! The wings are movable, allowing the linear cannon and missile launcher to be held in front. The wide range of motion of the shoulders allows for smooth holding of the railgun with both hands. The Beam Naginata for close combat comes with a grip for storage, and can be mounted on the waist. A beam shield using polarization molding is included; you can recreate the shield’s storage and deployment modes with parts replacement. Although this mecha is bulky, it’s flexible enough to get into a natural kneeling pose. And since the parts are molded in color, you’ll get a great-looking result just by assembling it. Order it for your own collection today!

[Includes]:

• Beam Naginata
• Beam rifle
• Rail gun
• Beam shield
• Jointparts
• Stickers

Bandai HG 1/144 Gundam Deathscythe — a High Grade 1/144 scale Gunpla kit of the iconic Gundam Wing mobile suit, complete with its signature beam scythe. Snap-fit, colour-separated parts mean no glue is required for a striking finished model.

Bandai HG 1/144 GFreD — a High Grade 1/144 scale Gunpla model kit. Features snap-fit, colour-separated parts and panel-lined detail for a great result straight from the box, with no glue required. Ideal for new and experienced modellers alike.

The Earth Federation Forces' mass-produced security-type Tech Proto, also used to maintain peace on Earth, is now part of Bandai's "30MM (30 Minutes Missions)" lineup!

• A large shield is included; new technology allows the shield's pattern to be reproduced in a single part.
• The visor can be displayed open or closed.
• The rear skirt can be attached to the back. 
  
• The armored version can be displayed in light armor by removing the armored parts.
• Articulated gimmicks are equipped in various locations.

Order yours today!

[Includes]:

• Grenade launcher
• Large shield
• Clear visor

The Earth Federation Forces' mass-produced security-type Tech Proto, also used to maintain peace on Earth, is now part of Bandai's "30MM (30 Minutes Missions)" lineup!

• A large shield is included; new technology allows the shield's pattern to be reproduced in a single part.
• The visor can be displayed open or closed.
• The rear skirt can be attached to the back. 
  
• The armored version can be displayed in light armor by removing the armored parts.
• Articulated gimmicks are equipped in various locations.

The Portanova, a signature unit of Bandai's "30MM (30 Minutes Missions)" model-kit series, makes its long-awaited debut in full armor, returning to the battlefield armed with powerful weapons!

Intermediate armor is included that further enhances the customizability of the original Portanova. Upgrade it to full armor with the intermediate armor!

A rifle is included to enable bold action poses, even in full armor.

The tip of the axe is movable; combine it to create a large axe.

The axe and rifle can be mounted on the backpack.

The RoyRoy support mecha is also fully armored; additional joints allow for increased customization.

Some armor parts from the 30MM 1/144 Commander Optional Armor [for Portanova/Red] are included in new coloring. 

Order yours today!

[Set Contents]:

Armor parts (x1 set)

RoyRoy

Axes (x2)

Rifles (x2)

Gauntlets (x2)

These model-kits offer the high attention to detail you've come to expect from Bandai. This snap-together product can be easily assembled, making it very approachable for less experienced builders, but the final product does not reflect that simplicity.

30 Minutes Fantasy is the newest plastic model kit release from Bandai, which features customizable mechs with a fantasy theme. The name refers to the claim that each kit can be completed in just 30 minutes, making them ideal for beginners or those with limited time. The models are typically pre-colored and snap together, allowing for a hassle-free building experience. The kits can also be combined with other elements from the 30 Minutes range. The line has mech figures styled as fantasy knights along with a range of option packs for 30 Minute style mechs, including armour for knights and paladins with shields, swords and other accessories.

Please Note:

• One 30MF Yoroi-Shinden Samurai Troopers (Ronin Warriors) Gai of the Heat is supplied, and some assembly may be required.

These model-kits offer the high attention to detail you've come to expect from Bandai. This snap-together product can be easily assembled, making it very approachable for less experienced builders, but the final product does not reflect that simplicity.

30 Minutes Fantasy is the newest plastic model kit release from Bandai, which features customizable mechs with a fantasy theme. The name refers to the claim that each kit can be completed in just 30 minutes, making them ideal for beginners or those with limited time. The models are typically pre-colored and snap together, allowing for a hassle-free building experience. The kits can also be combined with other elements from the 30 Minutes range. The line has mech figures styled as fantasy knights along with a range of option packs for 30 Minute style mechs, including armour for knights and paladins with shields, swords and other accessories.

Please Note:

• One 30MF Rosan Swordman is supplied, and some assembly may be required.