Bandai HG 1/144 GFreD — a High Grade 1/144 scale Gunpla model kit. Features snap-fit, colour-separated parts and panel-lined detail for a great result straight from the box, with no glue required. Ideal for new and experienced modellers alike.

The Earth Federation Forces' mass-produced security-type Tech Proto, also used to maintain peace on Earth, is now part of Bandai's "30MM (30 Minutes Missions)" lineup!

• A large shield is included; new technology allows the shield's pattern to be reproduced in a single part.
• The visor can be displayed open or closed.
• The rear skirt can be attached to the back. 
  
• The armored version can be displayed in light armor by removing the armored parts.
• Articulated gimmicks are equipped in various locations.

Order yours today!

[Includes]:

• Grenade launcher
• Large shield
• Clear visor

The Portanova, a signature unit of Bandai's "30MM (30 Minutes Missions)" model-kit series, makes its long-awaited debut in full armor, returning to the battlefield armed with powerful weapons!

Intermediate armor is included that further enhances the customizability of the original Portanova. Upgrade it to full armor with the intermediate armor!

A rifle is included to enable bold action poses, even in full armor.

The tip of the axe is movable; combine it to create a large axe.

The axe and rifle can be mounted on the backpack.

The RoyRoy support mecha is also fully armored; additional joints allow for increased customization.

Some armor parts from the 30MM 1/144 Commander Optional Armor [for Portanova/Red] are included in new coloring. 

Order yours today!

[Set Contents]:

Armor parts (x1 set)

RoyRoy

Axes (x2)

Rifles (x2)

Gauntlets (x2)

These model-kits offer the high attention to detail you've come to expect from Bandai. This snap-together product can be easily assembled, making it very approachable for less experienced builders, but the final product does not reflect that simplicity.

30 Minutes Fantasy is the newest plastic model kit release from Bandai, which features customizable mechs with a fantasy theme. The name refers to the claim that each kit can be completed in just 30 minutes, making them ideal for beginners or those with limited time. The models are typically pre-colored and snap together, allowing for a hassle-free building experience. The kits can also be combined with other elements from the 30 Minutes range. The line has mech figures styled as fantasy knights along with a range of option packs for 30 Minute style mechs, including armour for knights and paladins with shields, swords and other accessories.

Please Note:

• One 30MF Rosan Swordman is supplied, and some assembly may be required.

This is a posable, high-grade or better injection-plastic kit of an item from the Gundam universe.

Kit comes with a Beam Saber, Bazooka, Beam Rifle, and a shield.  Marking stickers are also  provided.

Marking the 20th anniversary of the Master Grade Ver.Ka series is the incredible MG Zeta Gundam Ver.Ka from "Mobile Suit Zeta Gundam"!

The proportions of the Gunpla are based on Kazumi Fujita's sketches of the Gundam for the anime. The structure and shape have been refined to ensure that there is no breakdown in the form between both the MS form and the Waverider form, and the transformation mechanism has been expertly constructed.

The MS form has a wide range of motion, allowing for a greater degree of recreation of poses from the show. The Waverider form can be displayed in a stable manner like a fixed aircraft model by providing a locking mechanism for each part.

The MG Zeta Gundam also features parts with metallic extra finish processing, along with water transfer decals designed by Katoki Hajime.

[Accessories]

Shield x 1
Beam rifle x 1
Beam saber x 2
Grenade launcher cartridge x 2
Hand parts x 1 set
Joint for display x 2 kinds (for MS/WR)
Figure x 2 types
Foil sticker sheet x 1
Water transfer decal sheet x 1

High Grade 1/144 scale plastic model kit by Bandai Spirits. Build the Monkey Rodi / Monkey Crab Rodi from Mobile Suit Gundam: Iron-Blooded Orphans. Snap-fit assembly — no glue required; paint and cement optional for a custom finish.

Bandai HG 1/144 Gundam Deathscythe — a High Grade 1/144 scale Gunpla kit of the iconic Gundam Wing mobile suit, complete with its signature beam scythe. Snap-fit, colour-separated parts mean no glue is required for a striking finished model.

These model-kits offer the high attention to detail you've come to expect from Bandai. This snap-together product can be easily assembled, making it very approachable for less experienced builders, but the final product does not reflect that simplicity.

30 Minutes Missions model kits exist in a parallel world several decades after the sudden appearance of an interspatial portal (Gate) in Earth's orbit, an event later known as the Sky Fall incident. While conflicts persisted worldwide, the introduction of a mecha weapon significantly altered modern combat tactics. The advent of the EXAMACS (Extended Armament & Module Assemble & Combine System) swiftly shifted the global military balance. As the year 2XXX neared its end, another interspatial portal (Gate) materialized in Earth's orbit, unleashing an alien species from the planet Byron, closely resembling Earthlings. The Byron Forces initiated attacks using their Portanova machines, similar to Earth's EXAMACS units. In response, warring nations united to form the Earth Alliance Forces, marking the onset of conflict between the Alliance Forces and the Byron Forces. Assemblable in 30 minutes, the runners are structured so that parts for each section are located close together, and the kits can be intuitively assembled from the top starting with the head, chest waist, and so on. This parts structure makes it shorter to assemble the kit compared to other plastic models.

Please Note:

• One 30MM Armored Core VI Fires of Rubicon Arquebus Corporation VP-40S is supplied, and some assembly may be required.

A new generation of super-deformed kits is here! The SD Cross Silhouette series allows you to choose between two different inner frames that will change the proportions of your kits. You can choose between the cuter look of the SD (Super Deformed) frame, or the taller and more action-packed look of the CS (Cross Silhouette) frame!

Shin Getter from “Getter Robo” gets his own SD Cross Silhouette kit! He’ll be highly posable on completion, and he’s armed with his massive Getter Tomahawk and Getter Battle Wing! Only the SD frame is included; the CS frame is sold separately. Order him today!

[Includes]:

Getter Tomahawk
Getter Battle Wing

This is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.

What a design! While the lineage is obvious it takes the Zeon style of design in a new direction. Well armed with two beam sabres and 12 1.3MW funnel remote beam weapons plus impressive speed and maneuverability it is a fantastic answer to the newer Gundams arrayed against it.

Bandai has struck MG gold yet again with this kit. In typical MG fashion EVERYTHING moves. From the head to the individual finger joints to the 10 funnel systems, each can be individually posed and removed. The shoulder armour opens just like the prototype. Opening cockpit area. Of course all parts are pre-coloured and assembly is literally a snap. However the appearance of the finished kit will be immeasurably improved by painting.

The 19 page instruction manual covers the design history of the AX-004 with line drawings. Color photos show painting details with paint mixing instructions. All text in Japanese.

The mass-produced MS "GM" of the Federation Forces that appears in "Mobile Suit Gundam" is now available as a plastic model.
You can reproduce the set color with Iropla and stickers.
In addition, since the left wrist with an expression is attached, you can pose attractively.

This is a posable, high-grade injection-plastic kit of an item from the Gundam universe.

Designated with the number of the beast, NZ-666 Kshatriya is one devastatingly powerful Mobile Suit that's to be feared especially when it is equipped with multiple beam cannons on its chest and binders, as well as 24 funnels and four hidden arms underneath the binders. Nicknamed "The Sleeved," the Mobile Suit piloted by Neo-Zeon ace pilot Marida Cruz is represented in sharp detail as this snap-fit plastic kit model with parts molded in color and will stand 15.5cm tall upon completion. Its four binders are movable and feature a locking mechanism on each binder for maintaining them in fixed poses. There are six funnels underneath each binder along with a flexible arm. Includes two beam sabers and a sheet of foil stickers.