Cyanocrylate Adhesive, GEL FORMULA, with 5x precision interchangeable glue tips, PROFESSIONAL FORMAT in 20 gr, extra large bottle, which will last until the end because of its super thin formula and the precision interchangeable glue tips. 

This Single component high viscosity no drip gel cyanoacrylate adhesive is ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap filling and repositioning time.

Precision tips will control the dispensing so that the glue will not come out too fast and will protect the nozzle from becoming stuck. You can use each tip many times before having to replace it. After using the glue tip and because it has a very small hole on nozzle, you may leave it on the bottle for weeks, not even capping the glue bottle without harming the glue in any way. The effect of the glue tips and the low density of the glue will force the glue all times flowing back into the bottle improving its preservation.

Glue tips need to be fitted tight on your glue bottles. Press the glue tip on with some pressure, so that it seats very tightly.

Recommendations:

- Make sure Glue tips has been fitted tight on your glue bottles before using.

- If you are not planning to use the CA glue for a long period of time prepare the glue for storage: remove the glue tip, clean and wipe your CA bottle nozzle and neck, and re-cap it. Keep the glue tip for next time.

- CA will last longer if it’s stored in a refrigerator because of the low humidity. If you have a desiccant absorbent packet, keep it with the CA glue inside a Zip-lock bag. Keep your CA glue as dry as possible at all times. We DON’T recommend storing in your freezer, since condensation can form when you take it out.

- Make sure your CA glue is stored away from your CA accelerator. The accelerator gives off fumes (aerosols) just sitting there, which can cause CA glue to harden in the bottle prematurely. We recommend a zip-lock bag for the accelerator.

CONTENT: 

1x 20gr. glue bottle 
5x glue tips

Cyanocrylate Adhesive, Super Glue type, with 5x precision interchangeable glue tips, PROFESSIONAL FORMAT in 20 gr, extra large bottle. 

The precision tips will control the dispensing so that the glue will not come out too fast and will protect the nozzle from becoming stuck. You can use each tip many times before having to replace it. After using the glue tip and because it has a very small hole on nozzle, you may leave it on the bottle for weeks, not even capping the glue bottle without harming the glue in any way. The effect of the glue tips and the low density of the glue will force the glue all times flowing back into the bottle improving its preservation.

Glue tips need to be fitted tight on your glue bottles. Press the glue tip on with some pressure, so that it seats very tightly.

Recommendations:

- Make sure Glue tips has been fitted tight on your glue bottles before using.

- If you are not planning to use the CA glue for a long period of time prepare the glue for storage: remove the glue tip, clean and wipe your CA bottle nozzle and neck, and re-cap it. Keep the glue tip for next time.

- CA will last longer if it’s stored in a refrigerator because of the low humidity. If you have a desiccant absorbent packet, keep it with the CA glue inside a Zip-lock bag. Keep your CA glue as dry as possible at all times. We DON’T recommend storing in your freezer, since condensation can form when you take it out.

- Make sure your CA glue is stored away from your CA accelerator. The accelerator gives off fumes (aerosols) just sitting there, which can cause CA glue to harden in the bottle prematurely. We recommend a zip-lock bag for the accelerator.

CONTENT: 

1x 20gr. glue bottle 
5x glue tips

GSW's cyanoacrylate adhesive accelerator, solvent-free alcohol-based, conveniently bottled in a mist spray format for a quick and easy use.

The Activator can be sprayed before or after applying the adhesive, but it works best when spraying onto the surface to be glued before applying the cyanocrylate glue. The Activator will then react with the glue to vastly accelerate the curing process, crystalising the cyanoacrylate almost instantly.

This will avoid the tedious waiting time for the cyanocrylate to finish drying, allowing you to continue working as soon as the cyanocrylate is used (be prepared, it can dry very very fast!).

Contains 30ml.

SAFETY NOTICES:
- Use only outdoors or in a well-ventilated area.
- Do not breathe gas/fumes/vapour from Ciano glues or the Accelerator.
- Keep out of the reach of children.
- Avoid contact with skin and eyes.
- Contains ETHANOL (ETHYL ALCOHOL). Do not spray on naked flames or any incandescent material.
- Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Keep away from sources of ignition. No smoking.
- Keep the product tightly closed in a cool place and in a place with adequate ventilation.
- Careful if applying onto painted parts, as the activator could harm dry paint.

20x Precision Interchangeable Super Glue tips, which will help you to use up the glue bottle until the end. 

The precision tips will control the dispensing so that the glue will not come out too fast and will protect the nozzle from becoming stuck. You can use each tip many times before having to replace it. After using the glue tip and because it has a very small hole on nozzle, you may leave it on the bottle for weeks, not even capping the glue bottle without harming the glue in any way. The effect of the glue tips with low and medium density CA glues will force the glue all times flowing back into the bottle improving its preservation.

Glue tips need to be fitted tight on your glue bottles. Press the glue tip on with some pressure, so that it seats very tightly.

Most of Cyanocrylate Adhesive bottles will accept this tips, but to be 100% sure, use ours. 

CONTROL your GLUE  & SAFE your FINGERS

Recommendations:

- Make sure Glue tips has been fitted tight on your glue bottles before using.

- If you are not planning to use the CA glue for a long period of time prepare the glue for storage: remove the glue tip, clean and wipe your CA bottle nozzle and neck, and re-cap it. Keep the glue tip for next time.

E600 Adhesive for Acrylic Plastics - 9ml

It does not bleach during drying. 
Curing time: 1-2 minutes

CONTENT: 
1x 9ml glue tube

Bond Enforcing Dust

Hardening Dust for cyanoacrylate glues to increase filling and bond strength. Highly refined powder to a granulometry of 45-90 microns to maximize the hardening effect.

Apply to the cyanoacrylate and allow to react for 5 min. Excess can then be sanded off and applied to solid surfaces. Not soluble in water. Non-toxic. Close container tightly after use.

Contents: 20gr.