This saline solution creates a whitish crystalline structure that simulates the effect of frost.Due to its natural composition, certain external factors such as humidity, temperature, and surface or structure where it's applied, can affect the formation of frost.
It can imitate the frost on trees, bushes, flowers, crystals and even imitate other crystalline formations.
Apply multiple layers and leave to dry between 4 to 24 hours. Subsequent applications could reactivate the crystallization process and make them grow. Can be cleaned with water if necessary.
The effects may differ depending on whether it is applied by brush or airbrush.In airbrushing it is recommended not to apply too thin layers since crystals will not form.It can be diluted with water but the crystals that form would be weaker.
Contains 17ml.
Warning
- The use of other products over the cured frost, such as paint, varnish or lacquer can affect the crystals. Once crystallized, if dampened, they could melt or simply weaken the crystals. Depending on the product used, they can crystallize again.
- Porous materials such as natural wood, MDF wood, cork, cardboard, etc can absorb the medium of the product, canceling the effect of the liquid frost. These materials must be sealed before applying the liquid frost.
- In the case of obtaining crystals, if you want to increase their hardness, you can use cyanoacrylate glue in liquid format and apply through capillarity (touch a small amount of fluid to the formation and allow it to flow in by itself, without touching the crystals with brush/nozzle etc). By doing this, some crystals may lose some detail if they are not well formed or attached. Using too much glue could release cyanoacrylate fumes.
- In case you want to dye the crystals, it should always be done with thin inks through capillarity, and it is recommended to fix them with the method above beforehand to affect their structure as little as possible.
Transparent acrylic gel especially designed to replicate moving water, waves and splashes with a realistic finish. It is ideal for naval dioramas or for scenery with smaller aquatic features such as river streams and puddles.
Drying time varies on the thickness. It is recommended to apply in thin layers, adding multiple layers if necessary. Can be combined with Ultraviolet Resin.
This is a fast-drying water-based Paint that cracks as it dries to create an eggshell cracking pattern in just 1 step. Apply direct from the bottle to the Surface. No need to apply multiple coats of Paint.
In case of surfaces excessively smooth, we recommend sanding them a bit to add roughness to improve the grip of the cracks. Matt Priming normally is enough for the grip.
Apply direct or with a brush. Depending on the thickness of application might get different size of cracks. Do not use a heat gun to speed up the drying process, just let it dry naturally. Take into account that, excessively irregular or very small surfaces may affect the size of the cracks.
GSW's dark blood effect paint,Coagulated Blood. Splatter your miniatures and models with a touch of horror with this glossy acrylic paint. It is perfect for violent scenes, gruesome miniatures and bloody battlefields. Let your mind lead your brush to the most macabre of places... Not real blood, but close.
This is a fast-drying water-based Paint that cracks as it dries to create an eggshell cracking pattern in just 1 step. Apply direct from the bottle to the Surface. No need to apply multiple coats of Paint.
In case of surfaces excessively smooth, we recommend sanding them a bit to add roughness to improve the grip of the cracks. Matt Priming normally is enough for the grip.
Apply direct or with a brush. Depending on the thickness of application might get different size of cracks. Do not use a heat gun to speed up the drying process, just let it dry naturally. Take into account that, excessively irregular or very small surfaces may affect the size of the cracks.
This waterbased Master Medium has a wide variety of uses when mixing with acrylic paint, such as increasing transparency, extending colour, increasing integrity, easing flow of paint and adding flexibility and adhesion.
This is a fast-drying water-based Paint that cracks as it dries to create an eggshell cracking pattern in just 1 step. Apply direct from the bottle to the Surface. No need to apply multiple coats of Paint.
In case of surfaces excessively smooth, we recommend sanding them a bit to add roughness to improve the grip of the cracks. Matt Priming normally is enough for the grip.
Apply direct or with a brush. Depending on the thickness of application might get different size of cracks. Do not use a heat gun to speed up the drying process, just let it dry naturally. Take into account that, excessively irregular or very small surfaces may affect the size of the cracks.
Waterbased acrylic ultra matt varnish, designed to protect models from dust, scratches, dirt and humidity. Recommended to be applied in thin layers after paint has fully dried.
GSW's blood effect paint,True Blood. Splatter your miniatures and models with a touch of horror with this glossy acrylic paint. It is perfect for violent scenes, gruesome miniatures and bloody battlefields. Let your mind lead your brush to the most macabre of places... Not real blood, but close.
Waterbased acrylic gloss varnish, designed to protect models from dust, scratches, dirt and humidity. Recommended to be applied in thin layers after paint has fully dried.
Alcohol-basedmetallic paint to achieve an effect that imitates the metallic reflection of a chrome surface similar to a mirror.
Although it is designed to be used with abrush, it also allows its application with anairbrush, it can be applied on any surface regardless of color, and should always be cleaned with alcohol.
The drying time that can vary depending on the environmental conditions and the thickness of the applied layer, but generally can range between 5 and 30 minutes, so it is recommended to protect the surface during its drying.
The mirror effect could be reduced or even lost if inks or varnishes are added on top.
This paint, when fresh, has the ability to dissolve the same paint already dried underneath, so it is recommended to apply it in a single pass, and on not too large surfaces.
Damp mud effect in a air drying transparent acrylic paste easy to apply on all surfaces. When mixed with pigments or sand it is ideal for simulating muddy terrain, wheel prints, dirty vehicle underbodies and other concentrations of mud and dirt.
Thanks to its crystalline and glossy finish, if used unmixed, it will also allow you to easily create minor water effects such as water streams or icicles.
A single greenstuffworld mud-effect bottle will allow you to create them all. You no longer need to buy lots of mud-effect bottles in different colors or densities, because you can create them at ease.
Drying time of 4-8 hours depending on the thickness.
Waterbased acrylic ultra matt varnish, designed to protect models from dust, scratches, dirt and humidity. Recommended to be applied in thin layers after paint has fully dried.
GSW Decal Fixer helps the application of decals onto surfaces of models, miniatures and dioramas. The GSW Decal Fixer prepares the surface with special agents that soften the solvents of modern paints making decals more resistant and glue stronger. In addition, the decal fixer makes the decal more flexible and increases the adherence, preventing the silvering effect.
Content: 1x 17ml bottle
INSTRUCTIONS
1.- Before applying a decal to your model, apply a bit of GSW Decal Fixer to the surface of the model where you are planning to set your decal. GSW Decal Fixer protects the paint beneath and smooths the surface, thereby helping to prevent silvering. Use a paintbrush to gently push the decal off the sheet and onto the model. If it is hard to move the decal around, adding bit more GSW Decal Fixer or water will help the decal float on the surface until it is positioned correctly.
2.- If the surface where you want to apply the flat decal is curved, like a shoulder pad, your decal could become wrinkled. To avoid this, once your decal is in place, apply GSW Decal Softener. Let the softener react and it will help remove wrinkles, as it adapts to the curved surface underneath. Repeat this step 2-3 times till wrinkles are removed.
Remove any excess with a cotton swab to remove the liquid caught between the decal and the surface. Roll the swab over the decal so it does not lift from the surface. You can also use a paper towel to press down on the decal in a rolling motion to remove the excess of liquids. By using GSW Decal Softener the relief cuts to remove wrinkles in your decal will not be needed.
3.- Finally apply GSW Decal Fixer again to the decal and the surface of the model where we have been working to unify the surface. Coat it as normal with matt or gloss varnish if you consider it necessary to remove or add a glossy finish.
The GSW Decal softener is the solution for the application of decals on uneven or rough surfaces.
It completely softens the decal to allow it to adapt and be perfectly fixed to the surface of the model in order to avoid the appearance of wrinkles, and in this way, you can obtain perfect results that otherwise would be impossible.
Content: 1x 17ml bottle
INSTRUCTIONS
If the surface where you want to apply the flat decal is curved, like a shoulder pad, your decal could become wrinkled. To avoid this, once your decal is in place, apply GSW Decal Softener. Let the softener react and it will help remove wrinkles, as it adapts to the curved surface underneath. Repeat this step 2-3 times till wrinkles are removed.
Remove any excess with a cotton swab to remove the liquid caught between the decal and the surface. Roll the swab over the decal so it does not lift from the surface. You can also use a paper towel to press down on the decal in a rolling motion to remove the excess of liquids. By using GSW Decal Softener the relief cuts to remove wrinkles in your decal will not be needed.
GSW's dark blood effect paint,Coagulated Blood. Splatter your miniatures and models with a touch of horror with this glossy acrylic paint. It is perfect for violent scenes, gruesome miniatures and bloody battlefields. Let your mind lead your brush to the most macabre of places... Not real blood, but close.
This product has been especially designed to create weathering effects similar to those achieved through powdered pigments, but have the benefit of not needing a pigment fixer to bind them.
They are ideal for creating light dusty and earthy effects, industrial dirt, rust marks and others by applying filters on different areas of the model.
They don't necessarily substitute the traditional method of powdered pigments since, depending on the desired effect, both can complement each other and be used in unison for different effects.
Fast drying and with a matt finish, their use is a lot easier than the traditional method of using pigments and fixers.
Valid for brush and airbrush.
Non-toxic waterbased paints. Non-flammable. No latex.
Contains: 6 Liquid Pigments - 17 ml
1x Orange Rust
1x Light Rust
1x Medium Rust
1x Dark Rust
1x Verdigris
1x Turquoise Oxide
This product has been especially designed to create weathering effects similar to those achieved through powdered pigments, but have the benefit of not needing a pigment fixer to bind them.
They are ideal for creating light dusty and earthy effects, industrial dirt, rust marks and others by applying filters on different areas of the model.
They don't necessarily substitute the traditional method of powdered pigments since, depending on the desired effect, both can complement each other and be used in unison for different effects.
Fast drying and with a matt finish, their use is a lot easier than the traditional method of using pigments and fixers.
Valid for brush and airbrush.
Non-toxic waterbased paints. Non-flammable. No latex.
Contains: 6 Liquid Pigments - 17 ml
1x Desert Earth
1x Ochre Earth
1x Light Earth
1x Medium Earth
1x Dark Earth
1x Burnt Earth
Glossy acrylic textureformud effectsdeveloped to create extreme realism. Texturizes and colors the surface, apply in layers of the desired thickness. It can be diluted with water or an acrylic thinner to modify its fluidity.
This paste is thick and has a dense consistency, suitable for representingglossy mud textureson a diorama, diorama swamps, orvignette bases. It can be easily spread with a brush or spatula. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.
This product has been especially designed to create weathering effects similar to those achieved through powdered pigments, but have the benefit of not needing a pigment fixer to bind them.
They are ideal for creating light dusty and earthy effects, industrial dirt, rust marks and others by applying filters on different areas of the model.
They don't necessarily substitute the traditional method of powdered pigments since, depending on the desired effect, both can complement each other and be used in unison for different effects.
Fast drying and with a matt finish, their use is a lot easier than the traditional method of using pigments and fixers.
Valid for brush and airbrush.
Non-toxic waterbased paints. Non-flammable. No latex.
Contains: 6 Liquid Pigments - 17 ml
1x Black Soot
1x White Dust
1x Dark Industrial Dust
1x Industrial Dust
1x Dark Green Dust
1x Light Green Dust
Acrylic texturefor soil andearth effectsdeveloped to create extreme realism. Texturizes and colors the surface, apply in layers of the desired thickness. It can be diluted with water or an acrylic thinner to modify its fluidity.
This paste is thick and has a dense consistency, suitable for representingearth texturesondioramaorvignette bases. It can be easily spread with a brush or spatula. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.
Acrylic textureforrust effects, developed to enhance and give volumetextureand details to thescale models, creating extremelyrusted surfaces. Texturizes and colors the surface, apply in layers of the desired thickness. It can be diluted with water or an acrylic thinner to modify its fluidity.
Thistextured pasteis thick and has a dense consistency, suitable for representingrust texturesondioramaorvignette bases. It can be easily spread with a brush or spatula. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.
