This single component high viscosity no-drip gel cyanoacrylate adhesive is ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap-filling and repositioning time. Drying time 5-10 seconds.

CONTENT:1x 20gr. CA modeling glue gel

RECOMMENDATIONS:

- Use Glue tips available at our site to extend the lifetime of the bottles
- If you are not planning to use the CA glue for a long period of time prepare the glue for storage: remove the glue tip, clean and wipe your CA bottle nozzle and neck, and re-cap it.
- Make sure your CA glue is stored away from your CA Glue Activator. The accelerator gives off fumes (aerosols) just sitting there, which can cause CA glue to harden in the bottle prematurely. We recommend a zip-lock bag for the accelerator.

Instant modeling glue from Green Stuff World, commonly known as cyanoacrylate glue, is the best super glue for plastic, and it is also a type of Cyanoacrylate that is widely used in various applications such as woodworking, model making, and jewelry making. This high-performance product is designed to bond a wide range of materials in 5-10 seconds including Plasticard, foams, rubber, metal, cork, wood, and ceramics. It is quick-drying properties and strong bond make it a popular choice for DIY projects and professional applications alike.

This is a single-component adhesive that is based on a family of synthetic acrylic resins known as cyanoacrylates. When applied to a surface, the adhesive quickly reacts with the moisture in the air to form a strong bond. The ciano is supplied in a bottle and is dispensed through a nozzle applicator.

When using it, it's important to take safety precautions to avoid skin or eye contact. The ciano is also known to release fumes during the curing process, so proper ventilation is recommended.

CONTENT: 1x Instant Glue 20gr.

GSW's cyanoacrylate adhesive accelerator, solvent-free alcohol-based, conveniently bottled in a mist spray format for a quick and easy use.

The Activator can be sprayed before or after applying the adhesive, but it works best when spraying onto the surface to be glued before applying the cyanocrylate glue. The Activator will then react with the glue to vastly accelerate the curing process, crystalising the cyanoacrylate almost instantly.

This will avoid the tedious waiting time for the cyanocrylate to finish drying, allowing you to continue working as soon as the cyanocrylate is used (be prepared, it can dry very very fast!).

Contains 30ml.

SAFETY NOTICES:
- Use only outdoors or in a well-ventilated area.
- Do not breathe gas/fumes/vapour from Ciano glues or the Accelerator.
- Keep out of the reach of children.
- Avoid contact with skin and eyes.
- Contains ETHANOL (ETHYL ALCOHOL). Do not spray on naked flames or any incandescent material.
- Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Keep away from sources of ignition. No smoking.
- Keep the product tightly closed in a cool place and in a place with adequate ventilation.
- Careful if applying onto painted parts, as the activator could harm dry paint.

Green Stuff World's slow-drying plastic glue, or Slow Cement Glue, is specially formulated to bond plastic parts through chemical fusion, providing strong, durable, and clean adhesion. Unlike instant adhesives, this slow-drying model allows for greater precision, ideal for large parts or structures that require adjustments before final hardening.

Its liquid formula slightly dissolves the surface of the materials, creating a chemical bond between the pieces that ensures a solid joint with no visible seams. The result is a strong, professional connection that is far superior to simple surface adhesion.

The drying time of 5 to 10 minutes, depending on the amount applied, is much slower than standard plastic adhesives, allowing the pieces to be moved and adjusted during the first few seconds, facilitating the assembly of models, vehicles, or large scenery elements. Once applied, it dries completely in approximately one hour, leaving a clean finish with no visible residue and easy to sand, cut, or work with.

Slow-drying plastic glue has been manufactured with a high-quality formulation, this glue for plastics is compatible with the most commonly used plastics in modeling, such as polystyrene (PE), ABS, uPVC, and plasticard. Its molecular fusion action ensures durable bonds even under stress or intensive handling.

For best results, it is recommended to clean the surfaces thoroughly before application, removing dust or grease, and to use a moderate amount of product with a brush or applicator needle. Hold the pieces firmly pressed together for a few seconds to ensure a uniform bond.

Beyond its adhesive capabilities, GSW Plastic Cements can also be used to texture plastic surfaces with exceptional realism. When a thin layer of cement is applied and allowed to react for a few seconds, the surface softens slightly, becoming malleable enough to be shaped with a stiff brush, sponge, or even a dry piece of sprue. This technique allows modelers to texture subtle surface imperfections and natural roughness directly into the plastic.

The resulting texture faithfully reproduces the look of molten metal, heat-distorted panels, oxidized armor, or cast industrial surfaces. It is particularly effective for armored vehicles, tanks, mechanical bases, and diorama structures, where it helps achieve a convincingly aged or battle-worn finish that looks far more organic than one obtained with putty or textured paints.

By controlling the reaction time, modelers can decide how deep the softening goes and therefore how strong the final texture will appear. The process merges chemical softening and manual shaping, producing a subtle “melted plastic” effect that brings an extra layer of depth and authenticity to any miniature or scale model project.

Suitable for polystyrene (PE), ABS, and uPVC.

CONTENTS:

1x square glass jar with 40ml (bottle dimension 44x44x60mm)
1x extra fine applicator brush

The glue for plastics, specially designed for model making and model kits, known as cement glue, is now available in a blue-colored version. This adhesive retains all the effectiveness and strength of the original transparent version, with the additional advantage of a blue tint that clearly indicates the areas where the glue has been applied.

This blue modeling glue comes in liquid form and is applied directly onto the surfaces intended to be joined. Its blue coloration provides excellent visual contrast, allowing precise identification of glue placement before it dries. This feature is particularly beneficial given the fast-drying properties typical of cement glues. With transparent versions, it can sometimes be difficult to see where the adhesive has been applied before it sets, making accurate placement challenging.

Like the transparent variant, the blue cement glue works by partially melting the surfaces it contacts, creating a chemical "weld" between them. This chemical fusion results in a strong bond, free of visible joints, similar to metal welding. It is especially effective for materials commonly used in model-making, such as polystyrene, uABS, plasticard, and HIPS.

Key advantages of using blue plastic glue include enhanced ease and accuracy during application due to the visibility of its color, along with maintaining the bond strength, rapid drying time, and compatibility with a variety of modeling materials. This results in a cleaner, more professional finish, ensuring durable and seamless connections.

As with transparent cement glues, it is essential to use the blue version in a well-ventilated area to avoid harmful inhalation caused by vapors released during the drying process.

To achieve optimal bonding with blue cement glue, surfaces must be properly prepared. This includes thorough cleaning to remove any dirt or grease, lightly sanding to enhance adhesion, and precise application using a fine brush or needle. Firmly pressing and holding the parts together during drying ensures strong, bubble-free bonding. Any excess glue should be promptly removed to maintain a neat finish.

Beyond their adhesive properties, GSW plastic adhesives can also be used to give texture to plastic surfaces with exceptional realism. When a thin layer of cement is applied and allowed to react for a few seconds, the surface softens slightly, becoming malleable enough to be shaped with a stiff brush, sponge, or even a dry piece of sprue. This technique allows modelers to texture subtle surface imperfections and natural roughness directly into the plastic.

The resulting texture faithfully reproduces the look of molten metal, heat-distorted panels, oxidized armor, or cast industrial surfaces. It is particularly effective for armored vehicles, tanks, mechanical bases, and diorama structures, where it helps achieve a convincingly aged or battle-worn finish that looks far more organic than one obtained with putty or textured paints.

By controlling the reaction time, modelers can decide how deep the softening goes and therefore how strong the final texture will appear. The process merges chemical softening and manual shaping, producing a subtle “melted plastic” effect that brings an extra layer of depth and authenticity to any miniature or scale model project.

Valid for the following types of materials: Polystyrene PE, ABS, and uPVC.

CONTENTS:

1x square glass jar with 40ml (bottle dimension 44x44x60mm)
1x extra fine applicator brush

Green Stuff World Acrylic Crystal Glue is a crystal-clear acrylic adhesive specially formulated for transparent parts and delicate materials. It offers strong bonding power with zero fogging or residue, making it the perfect choice for clear canopies, clear miniature bases, display cases, and other transparent components. It can also be used to fill small gaps between clear parts, as it dries completely invisible. Ideal for creating gems or realistic vehicle headlights after painting the inside with metallic silver or chrome paints.

Unlike cyanoacrylate glues, it does not release vapors that cause clouding, ensuring perfectly clean and polished joins every time. This acrylic-based modeling glue contains no solvents, making it safe for foam materials such as XPS or EPS without risk of melting or deformation. This adhesive is not suitable for bonding EVA foam materials.

Its low viscosity provides excellent flow and control, allowing for precise application even on small-scale parts. For best results, it is recommended to use fine glue applicator tips to achieve clean, accurate placement and avoid excess adhesive in delicate areas. The glue dries to a transparent, flexible finish that maintains clarity over time — it won’t yellow or lose transparency, even after years of use.

Because of its slower curing time (around one hour, depending on temperature and thickness), Crystal Glue gives users time to adjust parts into position before setting. This feature makes it ideal for modelers working on clear acrylic elements, resin dioramas, plastic kits, and airplane canopies, where perfect alignment and clean visual results are essential.

CONTENT: 1x 20gr

Bond Enforcing Dust

Hardening Dust for cyanoacrylate glues to increase filling and bond strength. Highly refined powder to a granulometry of 45-90 microns to maximize the hardening effect.

Apply to the cyanoacrylate and allow to react for 5 min. Excess can then be sanded off and applied to solid surfaces. Not soluble in water. Non-toxic. Close container tightly after use.

Contents: 20gr.