This multi-part plastic boxed set contains 75 components with which to build one Necron Triarch Stalker, and comes with two Necron transfer sheets. This kit is supplied unpainted and requires assembly - we recommend using Citadel Plastic Glue and Citadel Paints.

The placement of our model in a diorama or vignette gives it a reality, a background and a history, an added dimension and a reason for the humidity, the traces of mud, of the dry sand of the desert or the dark earth of the wooded landscapes of central Europe. The range of Diorama Effects offers the modeler everything needed for the reproduction of a terrain, with effects of sandy and dusty roads, or of snow, mud and water, all of which add to the realism of the setting and relate the model to its environment.

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs.

Length: 14'50 cm (5’5 inches)
Diameter: 2’5cm (1 inch)

USE INSTRUCTIONS: 

1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations.

2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this.

3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking.

4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture.

5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay.

MATERIALS:

There are plenty of different putties and clays on the market and all of them can be textured using the proper technique.

Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn!

In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases.

For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using Sculptor Vaseline (LINK).

Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.

*** For this type of epoxy putties, it is very important to clean the rolling pins properly after use.

CARE INSTRUCTIONS:

After working with the Rolling Pins, use a Scratch Brush (LINK) and plenty of water to clean off any residue on the Rolling Pins if required.

SAFETY:

To ensure safety, children should be closely monitored by a responsible adult. 

This is a direct order only item, if this item is out of stock, it may take at least a week to arrive if not longer. Please contact us for additional details.

Transparent acrylic filters with a metallic finish that allow to modify and metalize the colour they cover. Apply on top of other flat, metallic, or colourshift colours. Mixed together, or applied successively, they create new combinations. Shiny metallic finish. Valid for brush or airbrush.

They work similarly to Chameleon Colourshifts, but they are just one colour and the chameleonic effect is achieved through the combination of the base colour and the metal filter. You can apply them to any flat colour to essentially turn it into a Chameleon Colourshift of your own design.

It is preferable to apply over dark colours to appreciate their effect better, though over black you'll only see the tone of the metal filter. Over other dark colours you can create many combinations, we encourage you to experiment as the possibilities with these are endless!

Contents

1x 17ml Blue Interference

Metal Color is the innovative range of metallic colors with a water-based formulation, which uses aluminium pigments in its production. The Metal Color range offers a wide range of shades in order to imitate the metallic finish of aircraft of all types and eras. Of exceptional brightness and extraordinary power of reflection, it allows the modeler to carry out the full range of painting techniques without the need to resort to enamels and lacquers. It can be applied directly to the model using an airbrush or diluted with our Airbrush Thinner or Flow Improver. Metal Color dries very quickly, maintaining the smallest details present on the model and forming a homogeneous and self-leveling layer of extraordinary resistance a few hours after application. Metal Color can be tinted directly in the airbrush cup using colors from the Model Air or Game Air ranges. It can also be applied with a brush. Recommended compressor settings for our colors are around 15-20 Psi or 0.5-1 kg. It is advisable, in the case of airframes and aircraft model components, to apply Gloss Black Primer, available in 60 ml / 2.02 fl oz bottles (ref. 73.660) and 200 ml / 6.76 fl oz (ref. 74.660) with hinge cap and dropper, to enhance the special characteristics of the aluminium shades. Metal Color dries very quickly, but it is advisable to wait 12 hours after application before applying any paint masks. Also available is Gloss Metal Varnish in 60 ml / 2.02 fl oz bottles (ref. 26.657) with hinged cap and dropper. For proper maintenance of the airbrush, we recommend using Vallejo Airbrush Cleaner.

Packaging:
Available in 32 ml/1.08 fl oz bottles with a hinged cap and eyedropper closure. Includes stainless steel stirring ball to improve paint mixing.

UK SHIPPING ONLY

The Magna Rack was designed for those gamers who like to store and transport their miniatures magnetized upright and free from other materials.  Magna Racks can be assembled in many different ways using these Magna Rack Spacer Legs.

4x Bottom Plugs and 4x Top Caps or Plugs are required for each Magna Racks kit assembly. 2 inch Short Legs with Top Caps create a flush top tray when assembled. Any sized spacer leg (excluding 2 inch short spacer legs) with the Top Plug create a 1/2 inch space on the top tray.

With this set, you will receive four spacer legs which allow you to adjust the height between your Magna Rack Trays.  

Sizes available include 2, 2 short, 3, 4, 5 and 6 inch spacer legs.  

These spacer legs work with all Magna Rack Trays.

Magna Rack Trays and Plugs sold separately. Some assembly required. For Magna Rack Assembly Instructions, please click here.

This multi-part plastic kit contains the components necessary to assemble a Lord of Blights. Bloated and bursting, like most of the Rotbringers, his silhouette is noticeably dominated by the makeshift gallow rack nailed to his back, from which 3 ripening heads dangle. He wields an enormous, dented bubotic hammer along with a vermid shield – these are both covered in the appropriate Nurgle icons, with the shield being especially spiked and disease-ridden.

His belt, over which his unpleasantly distended and torn belly flops, features a plague knife. The aforementioned belly is disgorging maggots at an alarming rate – it’s difficult to tell how the Lord of Blights feels about this, as his face is covered almost entirely by his helmet, through which one eye socket peers curiously.

The Lord of Blights comes as 7 components, and is supplied with a Citadel 40mm Round base.

Selected for rotational duty from exceptional Stormtrooper squads, Imperial Shoretroopers are trained not only in tropical environment operations, but also in entrenched warfare. Often assigned to important bases such as the Imperial security facility on Scarif, Shoretroopers use their expertise and equipment to counter Rebel ambushes and ensure Imperial secrets remain safe. 

Within this expansion, you’ll find seven unique, unpainted Imperial Shoretrooper miniatures to add to your Star Wars™: Legion collection. Five of these troopers are armed with E-22 blaster rifles while a Shoretrooper equipped with a T-21B targeting rifle is ready to deal extra damage from long range. But if you’re truly looking to keep enemy units from escaping with sensitive information, a DF-90 Mortar Trooper can be added to your army as a detachment from the rest of your Shoretroopers. Rounding out this expansion are two unit cards, five upgrade cards to fully kit out your Shoretroopers, and all the tokens you need to deploy them to any battle.

• Safeguard Imperial secrets with the seven unique unpainted miniatures you'll find in this expansion! Five Shoretroopers carrying the powerful E-22 blaster rifle are ready to comb the beaches of Imperial occupied worlds in search of any intrusion. Meanwhile, a Shoretrooper with a T-21B targeting rifle can bring down enemies from a distance.
• Ensure nothing escapes your grasp by adding a DF-90 Mortar Trooper to your army as a detachment from your Shoretroopers! 

Acrylic paints with an opaque and smooth matt finish, especially designed for modelling and miniature painting. Formula curated and carefully developed by experienced artists using a new generation of pigments, the Acrylic Color range aims to provide a full spectrum of all basic tones and shades necessary for wargames, vehicles, miniatures and dioramas, as well as colours exclusive to GSW.

Rich in high quality pigments, these colours will leave a fine homogenous layer of fast drying paint, respecting all details on the surface. Perfect for glazes and other techniques, making them adequate for experts and amateurs alike. Designed especially for brush painting, but Acrylic Color paints can be used with an airbrush when slightly diluted with Acrylic Thinner.

Non-toxic water-based with no latex. Shake well before use. Includes stainless steel mixing ball.

Contains: 17ml.

*This Paint may contain a protective seal, remove before use.

This is a direct order only item, if this item is out of stock, it may take at least a week to arrive if not longer. Please contact us for additional details.

Vallejo Game Colour is a range containing colours more common in Fantasy and Sci-fi settings. Vallejo Game Color contains finely ground pigment and a special resin formula that gives the paint unparalleled coverage durability, and dries to an opaque finish.

Vallejo Game Color acrylic paint is designed to give superior coverage on metal, plastic and resin models, and can be freely mixed with other acrylic colours and Vallejo Auxiliary products.

Once sealed with varnish, the colours are highly resistant to scratching and solvent application.

The Vallejo Game Colour acrylic paint range comes in convenient dropper bottles, giving painters and hobbyists complete control over paint flow from the bottle.

Fueled by his hatred, Darth Maul operates in the shadows, seeking the right moment to take his revenge on the Jedi. This master of the Juyo form of lightsaber combat wields his iconic double-bladed lightsaber to great effect as his Sith probe droids help him hone in on his next target.

With this expansion, you can dispatch Darth Maul and his Sith probe droids to do your bidding. The beautifully detailed, unpainted Darth Maul miniature can be assembled in three distinct poses while his three signature command cards make him a particularly versatile fighter. Finally, eight upgrade cards let you fully fully explore his dark power.