For the first time ever, the dice and dice case set comes to the ONE PIECE CARD GAME!

Enjoy the unique, special design!

Contents:

• 6x Dice
• 1x Dice Case

This set of 16 dice, coloured green to match the skin of the orruks, will instil the fear of these kunnin’ brutes in your enemies in games of Warhammer Age of Sigmar.

Each 16mm cubed dice with rounded edges is cast in green. The markings are picked out in yellow, and the '6' face bears the icon of the Orruk Warclans.

This multipart plastic kit builds the Malcador Infernus, an infantry-roasting heavy tank for your Solar Auxilia armies in games of Warhammer: The Horus Heresy. This kit includes options to customise your tank, including auxiliary weapons and support systems. Two side sponsons can mount heavy bolters, lascannons, autocannons, multi-lasers, or heavy flamers. You'll also find a flare shield, hunter-killer missile, dozer blade, and other optional accessories. The top hatch can be built closed, or with a crew-member, and can also sport a pintle-mounted heavy flamer, multi-laser, or heavy stubber.

This kit contains 201 plastic components and 1x Solar Auxilia Vehicle Transfer Sheet containing 180x high-quality waterslide transfers to customise your model.

This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Yellow rust is often found in settings where standing water has most likely been present and can have a very bright yellow colour. Water soluble to easily tone back effects for the perfect result. Mixes with our other water soluble paints.Usage Instructions:

• The pot and surface should be at room temperature or warmer before use. The rust colour may not appear if the pot and/or the surface are very cold.
• The mixture will settle on the bottom of the pot. It’s very important to thoroughly shake the pot with the ball bearings rattling before each and every use. Thoroughly stir the mixture and ensure that solids on the bottom of the pot are fully mixed into the liquid. Repeat stirring and shaking until all lumps have gone. It’s much better to shake and stir rust paint when the pot is at room temperature or warmer. If the pot is cold it may not be possible to fully mix any solids into the liquid.
• Use rust paint straight from the pot. Replace the lid quickly during use to prevent the liquid from evaporating or decant what you need to use for a job into a separate smaller pot/container with a lid.
• Do not add water into the paint pot – this may prevent the colour from forming.
• Ensure surfaces are clean, dry and grease free. Test the paint on hidden surfaces before use to ensure compatibility and adhesion.
• Only apply to non-porous surfaces such as plastic and metal. Do not apply to porous/absorbent surfaces such as bare timber or paper. Rust paint can be applied to painted surfaces, but test first. If the effect does not form, try first sealing the surface with varnish.
• Rust paint is water soluble and the effects of painting will be lost by washing in water or by getting wet, but there may still be staining. Do not expose rust paint to rain or splashing with water.
• Rust paint looks best when applied to a rough surface.
• To fill dents and grooves in surfaces, first cover the surface with rust paint, and then wipe the paint off the raised areas with a damp cloth (at an angle to the grooves), leaving some of the paint trapped. The wetter the cloth, the more paint removed.
• When fully dry, rust paint can be made more permanent by spraying with fine/mist coats of acrylic varnish/lacquer. Test varnish first because types of varnish change the colour/shade of the paint.
• When dry, avoid scuffing/scratching the finished paintwork.

For the best results it’s best to practise different techniques listed below before final use.

• To darken the shade apply more coats. Allow each coat to fully dry before applying another. Any number of coats of rust paint can be applied over the top of each other. For a broken, patchy effect apply to small areas/patches at a time and allow to dry – more in some areas, less in others.
• The shade will vary depending on the quantity applied. A thick coat of paint will dry a darker shade, and a thin coat of paint will dry a lighter shade.
• Further variations in shade can be created by dabbing a damp or wet brush, cloth or tissue onto the painted surface and then leaving to dry. As the water dries, the dye in the paint separates into shades of light and dark rust. The more water used, the greater the effect. This technique can be used after the paint has dried or while it is still wet. Another option is to simply splash water onto the rust paint and leave to dry – without dabbing.
• For a very dark shade, decant a small amount into a separate pot and allow the paint to evaporate. The more the paint evaporates, the thicker and darker the paint gets (may not be possible to spray if too thick).

Brush Application

• Dip the brush and immediately apply to the surface. For a patchy effect dab the paint onto a surface and keep dabbing in the same place until the paint dries. Any number of coats can be applied in this way. For a more even effect paint an even coat onto a surface.
• A different rust effect is obtained depending on whether a soft or stiff brush used to apply the paint.
  • Fine Soft Brush: For very detailed work. Apply a small amount to the brush and apply directly to the surface.
  • Larger Soft Brush: For apply larger amounts to larger areas. For a darker shade apply larger quantities and for lighter shades apply smaller quantities.
  • Stiff Brush: Very light shades can be obtained by dabbing a very small quantity of rust paint onto a surface using a stiff brush. Allow rust paint to dry slightly on the brush for a very light effect, similar to the “dry brushing” painting technique.
• Always clean the brush in water straight after use. Do not let rust paint fully harden onto brush. If for any reason rust paint has dried onto a brush, soak the brush in methylated spirits to fully clean, (but check first that this will not damage the brush).

Cloth/Tissue Application

• Pour on a cloth or tissue and dab onto a surface and keep dabbing in the same place until the paint dries.
• For a light shade apply a small amount at a time. For a darker shade apply a larger quantity.

 Spray Application

• Spray rust paint onto a surface straight from the pot using an air brush or pressure pot spray gun. Clean air brush immediately after use.

Rust Effect is water soluble. Rust Effect can be wiped off surfaces in two ways (even when fully dry):

• Using a damp cotton bud.
  • Only dampen one end of the cotton bud.
  • Wipe rust paint with the damp end first, and then with the dry end.
  • The wetter the cotton bud, the more rust paint is removed.
• Using a sheet of kitchen roll (absorbent paper towel).
  • First apply rust paint onto the panels so that they are fully covered, and leave to dry.
  • Flatter one end of a piece of kitchen roll, and dip this end into water.
  • Remove most of the water from the flat end so that it’s only slight damp. This can be done by pushing the flat end against other dry pieces of kitchen roll.
  • Gently press the damp flat end of kitchen roll against the dried rust paint, and twist the kitchen roll.
  • Keep the kitchen roll in one place, do not wipe side to side across the surface. Some rust paint is left on the model and some removed. Some rust paint will have been wetted by the damp kitchen roll and will change shade to look darker, just like old rust.
  • The wetter the rust paint gets, the darker the shade. Practice first to check how damp the kitchen roll should be and how much pressure to apply.

Create different shades of rust using water:

• Apply rust paint to a surface.
• Apply a small amount of water to the rust paint and either allow to dry on its own, or dry by dabbing with a piece of kitchen roll or tissue. This usually causes the colours to separate and dry different shades and more patchy.
• Water can be applied to the surface after the rust paint has fully dried or when the rust paint is still wet.

Rohan is a proud realm that has ever stood against evil, yet it is no stranger to war and turmoil. Even now, bands of Dunlendings and scouting Uruk-hai raid the villages and settlements, killing people, destroying farms, and burning whatever buildings remain standing.

This multipart plastic kit builds a significant Rohan Stronghold for your armies to fight over in the Middle-earth Strategy Battle Game. The six houses offer a number of assembly options with double-sided house walls – each with different details – and a choice of decorations for the timber roof lintels. Each can be built with one of three porch options, and the kit also includes a number of fences, barrels, and ropes for you to further decorate your houses. Both watchtowers include a warning bell with which defenders can sound the alarm, and are proudly adorned with the horse-head icons of Rohan. Each palisade includes a walkway that is 25mm wide to accommodate archers or fighters manning the walls. The palisade gate can be assembled to open or close freely, and can hold a removable crossbeam to allow defenders to lock the gate. This kit also includes eight ladders to reach the palisades, of which four can be connected to make a pair of taller ladders for infantry to reach the watchtowers.

This set contains:

– 2x Rohan Watchtowers
– 8x Palisade Walls
– 6x Rohan Houses
– 8x Palisade Ladders (pairs of which can alternatively be connected to make Watchtower Ladders)
– 6x Dormer windows
– 6x Porches
– 12x Barrels
– 36x Ropes
– 24x Fences

This kit contains 680 plastic components. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.

© New Line Productions, Inc. All rights reserved. MIDDLE-EARTH, THE LORD OF THE RINGS: THE FELLOWSHIP OF THE RING, THE LORD OF THE RINGS: THE TWO TOWERS, THE LORD OF THE RINGS: THE RETURN OF THE KING and the names of the characters, items, events and places therein are trademarks of Middle-earth Enterprises, LLC under license to New Line Productions, Inc. (S25)

© Warner Bros. Entertainment Inc. All rights reserved. THE HOBBIT: AN UNEXPECTED JOURNEY, THE HOBBIT: THE DESOLATION OF SMAUG, THE HOBBIT: THE BATTLE OF THE FIVE ARMIES, THE LORD OF THE RINGS: THE WAR OF THE ROHIRRIM and the names of the characters, items, events and places therein are trademarks of Middle-earth Enterprises, LLC under license to New Line Productions, Inc. (S25)

Middle-earth, The Hobbit and The Lord of the Rings and the names of the characters, places, items and events therein, are trademarks of Middle-earth Enterprises, LLC used under license by Games Workshop. All rights reserved. (S25)

This multipart plastic kit allows you to build a Hobgrot Slittaboss for use in Orruk Warclans armies in games of Warhammer Age of Sigmar. They're great for inspiring their underlings and thanks to sneaky underhand tactics, and no shortage of toxins, they're a threat for enemy characters in a duel. This miniature can be built with a choice of two head options – one with a helmet and another sporting an eye patch.

This kit comprises eight plastic components and 1x Citadel 32mm Round Base. This miniature is supplied unassembled and unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.

This 88-page hardback book is a Path to Glory expansion for Warhammer Age of Sigmar. It lays out the narrative background following the battle for Hel Crown, along with the rules you'll need to play narrative games – a story-based game type where you fight a series of battles in a campaign that all links together. You can also build and upgrade your Path to Glory army between battles, and run your campaigns.

Contains:

The Ravaged Coast
Richly detailed background sections lay out the narrative of what’s happening along the Ravaged Coast. The tale of the crumbling Skaven frontier and the champions fighting there is told through stories, maps, and detailed illustrations.

Path to Glory Battlepack
Fight a campaign for control of a vital island with new paths for heroes and regiments, rules for acquiring battle scars and forging emberstone-enhanced weapons, a Regiment of Renown for each Grand Alliance, enhancements and lores for this region of Aqshy, and more.

Battleplans
12 battleplans for use in your games, including Light the Fires and Assault on the Sea Cave, which offer an array of gameplay challenges.

Path to Glory Roster
The special Ravaged Coast roster makes it easy to record the progress of your warriors, along with their boons and scars.

As this is an expansion for Warhammer Age of Sigmar, you will also require a copy of the Warhammer Age of Sigmar: Core Book, available separately, to make full use of it.

This book also contains a one-use code to unlock Path to Glory: Ravaged Coast content in Warhammer Age of Sigmar: The App.