A round brush with a point designed for detailed shading, this brush (M Shade) features a synthetic and sable bristle blend for maximum paint retention, with an optimised bristle length allowing immediate, impressive results.
A one-stepgel with crystal transparency, squeeze this product straight from the bottle onto your diorama or miniature base to create beautiful replicas of thesea, rivers, lakes, ponds or puddles. It has a multitude of advantages over other traditional ways of creating water effects:
Ultrafast drying gel.This product can be combined with a UV Torch to dry in 2-4 minutes. On a sunny day, the gel has a drying time of 5-10 minutes. On a cloudy day, 20-40 minutes.
Can be dyed.The UV Resin can be mixed with any of our inks to dye the gel with only a few drops, allowing to create different types of water, such as bogged swamps or radioactive lakes!
Doesn't shrink. The UV Resin doesn't shrink like other water replicating materials. The quantity of resin used is the quantity of resin you get when fully dried.
Multilayer friendly.In case you want to create the effect of submerging something in water, multiple layers can be placed on top of each other without leaving layer marks.
Can be cut, polished and worked easily. The resin is easy to manipulate and can be shaped and carved however you want!
Low smell and toxicitycompared to more traditional methods.
Contains: 100ml
* When the resin is in its non-solid state you can use a heat gun or a kitchen lighter to heat the resin and force out any air bubbles that may have gotten caught in it.
* Keep in mind that the resin will remain in its gel state indefinitely until a source of natural light or ultraviolet light comes into contact with it.
* Do not expose the inside of the bottle to natural light, otherwise the gel could start a reaction and crystallize.
Get the right consistency from the beginning with The Army Painter Mixing Balls.
The Army Painter paints are heavily pigmented for the best possible coverage for your models and miniatures. But as pigment tends to sink to the bottom, most hobby paints tend to separate over time. But worry not! We’ve got the solution.
Simply add two of our 5.5 mm stainless steel high-grade Mixing Balls into your paint bottle and give it a good shake for 30 seconds. The Mixing Balls help agitate the paint and blend these components back together, ensuring a perfect consistency for application so that your brushwork remains smooth and precise throughout your project.
Heavy pigment, old paint or a combination thereof can create clumps or lumps in your paint which can ruin the smoothness of your paint job. Mixing balls (which are also sometimes called stirring balls, paint mixing balls, or agitator balls) help break up any clumps or solidified paint particles, making it easier to work with and reducing the likelihood of unwanted textures on your models.
Using the paint mixing balls is a practical and cheap tool for hobbyists who want to maintain the quality and consistency of their paints. This is essential for achieving high-quality results when painting models and miniature figures. Our Mixing Balls are made of rustproof stainless steel and will not discolour your paint.
Remember to use two Mixing Balls in your paint bottle. By using two, your Mixing Balls will move in a more randomised way and thus make the shaking more efficient and effective.
Citadel Layer paints are high quality acrylic paints that provide you with a huge range of colours and tones to choose from when you paint your miniatures. They are designed to be used straight over other acrylic paints (and each other) without any mixing. By using several layers you can create a rich, natural finish on your models that looks fantastic on the battlefield.
All of our paints are non-toxic, water-based acrylic that are designed for use on plastic, metal, and resin miniatures. One pot contains 12ml of layer paint.
Citadel Base paints are high quality acrylic paints specially formulated for basecoating your Citadel miniatures quickly and easily. They are designed to give a smooth matte finish over black or white undercoats with a single layer.
All Citadel paints are non-toxic, water-based acrylic that are designed for use on plastic, metal, and resin miniatures. One pot contains 12ml of paint.
Death Guard Green Spray is designed for basecoating all Citadel miniatures. When sprayed over an undercoat, it's a fast way to get a uniform base of colour onto your models.
The colour in this spray is exactly the same as Citadel Base: Death Guard Green, so if any part of the model gets missed when spraying, a quick tidy up with the equivalent paint will provide a complete basecoat.
This can contains 400ml of Death Guard Green Spray.
The best way to get the flashiest cards, Collector Boosters are souped-up with rares, foils, and special treatments you won't find anywhere else, including the possibility of a special Serialized card, grand prize of the multiversal death race. In this box you'll find 1 Box Topper containing 2 cards with a special foil treatment and 12 Aetherdrift Collector Boosters, each containing 15 Magic: The Gathering cards and 1 Traditional Foil double-sided token. Every pack includes 5 cards of rarity Rare or higher, 3–5 Uncommon, 4–6 Common, and 1 Full-Art Land cards, with a total of 10–12 Traditional Foil cards. Serialized card in <1% of Collector Boosters.
IT'S ONLY A DEATH RACE IF YOU DIE - Buckle up for a death race across the Multiverse full of high-octane action and adrenaline-fueled Magic gameplay
STEP INTO THE WINNER'S CIRCLE - Rev up your decks and lead the pack with top-gear cards; Collector Boosters are the ultimate way to add unique and exclusive cards to your collection, with tons of foils, special card treatments, and more inside every pack
2 FOIL BOX TOPPER CARDS - A tantalizing prize for a high-stakes match, with every booster box you'll score a Box Topper containing 2 cards gleaming with a brand new foil treatment
COLLECTOR BOOSTER-EXCLUSIVE TREATMENTS - Collector Boosters are the only place you may find certain coveted card styles, including Collector Booster-exclusive foil treatments, Japan Showcase cards, or the grand prize: a special Serialized card printed with a unique number
COLLECT ALT-BORDER CARDS - Turbo charge your collection with a grand total of 6 alternate-border cards in every Aetherdrift Collector Booster
ALL GAS, NO BRAKES - Collect some the hardest-to-find cards and leave your competition in the dust with 5 cards of rarity Rare or higher in every pack
This multi-part plastic kit contains the components necessary to assemble a Primaris Redemptor Dreadnought. Standing twice the height of the already-tall Primaris Space Marines – and taller and broader than the standard Dreadnought – this is an exceptionally aggressive-looking model that befits its status as a powerhouse on the gaming table. It comes with a choice of gatling cannon or plasma incinerator on the right arm, with a Redemptor fist and heavy flamer support weapon or gatling cannon on the left, 2 chest-mounted fragstorm grenade launchers or storm bolters and a carapace-mounted Icarus rocket pod for aerial denial.
The heavy armour on the chest – replete with flat surfaces and sharp lines, perfect for adding transfers and detail – of the Redemptor Dreadnought can be modelled to pivot open, showing the sarcophagus interred within. The adventurous hobbyist can remove the pegs from the waist, arms and legs of the model too, allowing for a greater range of posing options.
The Primaris Redemptor Dreadnought comes as 109 components, and is supplied with a Citadel 90mm Round base and a transfer sheet.
This saline solution creates a whitish crystalline structure that simulates the effect of frost.Due to its natural composition, certain external factors such as humidity, temperature, and surface or structure where it's applied, can affect the formation of frost.
It can imitate the frost on trees, bushes, flowers, crystals and even imitate other crystalline formations.
Apply multiple layers and leave to dry between 4 to 24 hours. Subsequent applications could reactivate the crystallization process and make them grow. Can be cleaned with water if necessary.
The effects may differ depending on whether it is applied by brush or airbrush.In airbrushing it is recommended not to apply too thin layers since crystals will not form.It can be diluted with water but the crystals that form would be weaker.
Contains 17ml.
Warning
- The use of other products over the cured frost, such as paint, varnish or lacquer can affect the crystals. Once crystallized, if dampened, they could melt or simply weaken the crystals. Depending on the product used, they can crystallize again.
- Porous materials such as natural wood, MDF wood, cork, cardboard, etc can absorb the medium of the product, canceling the effect of the liquid frost. These materials must be sealed before applying the liquid frost.
- In the case of obtaining crystals, if you want to increase their hardness, you can use cyanoacrylate glue in liquid format and apply through capillarity (touch a small amount of fluid to the formation and allow it to flow in by itself, without touching the crystals with brush/nozzle etc). By doing this, some crystals may lose some detail if they are not well formed or attached. Using too much glue could release cyanoacrylate fumes.
- In case you want to dye the crystals, it should always be done with thin inks through capillarity, and it is recommended to fix them with the method above beforehand to affect their structure as little as possible.
Kneadatite Blue/Yellow Green Stuffis a room-temperature curing two-part epoxy putty sold either in tape format.
Mixing equal parts of the yellow 'filler' and blue 'hardener' produces a sticky green putty that feels a lot like chewed bubble gum. Once mixed, it has a worklife of 90 minutes, allowing time for shaping and detailing, reaching 'ultimate hardness' after 24 hours. Altering the mix with more blue or yellow component will produce a faster/slower and harder/softer cure.
We recommend to use a little lubricant to prevent Green Stuff from sticking. Normally water is enough but some people also use others such as Vaseline, petroleum jelly or even jhonson baby oil to get smooth surfaces. Keep wet fingers and tools to make easier the sculpting and modeling process. You may also add talcum powder to reduce the stickiness and avoid fingerprints.
This set contains 12 inches of material --> 30 cm.
Citadel Dry Compounds are of a thicker consistency than other Citadel paints, which makes them perfect for drybrushing - a handy way to pick out the details on a model, or apply highlights swiftly and easily.
All of our paints are non-toxic, water-based acrylic that are designed for use on plastic, metal, and resin miniatures. One pot contains 12ml of paint.
Acrylics colors in a matt and opaque, water-based formula, especially designed for brush-on use. Each color has been meticulously developed in collaboration with model-painters who specialize in fantasy figures and dioramas. The formulation of these colors has been developed signed taking into account that some of these figures are used in tabletop games, so that Game Color is manufactured with a revolutionary new resin which offers extraordinary resistance to the damage caused by frequent handling. It is recommended to apply Game Color on a previously primed surface. The colors dry rapidly and form a homogenous and self-leveling film while preserving even the smallest detail of a miniature. Game Color presents an extra ordinary adherence on all grounds, such as resin, plastic, steel and white metal. Painting tools are cleaned with water.
Game Color is not flammable, and does not contain solvents
A one-stepgel with crystal transparency, squeeze this product straight from the bottle onto your diorama or miniature base to create beautiful replicas of thesea, rivers, lakes, ponds or puddles. It has a multitude of advantages over other traditional ways of creating water effects:
Ultrafast drying gel.This product can be combined with a UV Torch to dry in 2-4 minutes. On a sunny day, the gel has a drying time of 5-10 minutes. On a cloudy day, 20-40 minutes.
Can be dyed.The UV Resin can be mixed with any of our inks to dye the gel with only a few drops, allowing to create different types of water, such as bogged swamps or radioactive lakes!
Doesn't shrink. The UV Resin doesn't shrink like other water replicating materials. The quantity of resin used is the quantity of resin you get when fully dried.
Multilayer friendly.In case you want to create the effect of submerging something in water, multiple layers can be placed on top of each other without leaving layer marks.
Can be cut, polished and worked easily. The resin is easy to manipulate and can be shaped and carved however you want!
Low smell and toxicitycompared to more traditional methods.
Contains: 100ml
* When the resin is in its non-solid state you can use a heat gun or a kitchen lighter to heat the resin and force out any air bubbles that may have gotten caught in it.
* Keep in mind that the resin will remain in its gel state indefinitely until a source of natural light or ultraviolet light comes into contact with it.
* Do not expose the inside of the bottle to natural light, otherwise the gel could start a reaction and crystallize.
Citadel Layer paints are high quality acrylic paints that provide you with a huge range of colours and tones to choose from when you paint your miniatures. They are designed to be used straight over other acrylic paints (and each other) without any mixing. By using several layers you can create a rich, natural finish on your models that looks fantastic on the battlefield.
All of our paints are non-toxic, water-based acrylic that are designed for use on plastic, metal, and resin miniatures. One pot contains 12ml of layer paint.
Vallejo Game Colour is a range containing colours more common in Fantasy and Sci-fi settings. Vallejo Game Color contains finely ground pigment and a special resin formula that gives the paint unparalleled coverage durability, and dries to an opaque finish.
Vallejo Game Color acrylic paint is designed to give superior coverage on metal, plastic and resin models, and can be freely mixed with other acrylic colours and Vallejo Auxiliary products.
Once sealed with varnish, the colours are highly resistant to scratching and solvent application.
The Vallejo Game Colour acrylic paint range comes in convenient dropper bottles, giving painters and hobbyists complete control over paint flow from the bottle.
Citadel Layer paints are high quality acrylic paints that provide you with a huge range of colours and tones to choose from when you paint your miniatures. They are designed to be used straight over other acrylic paints (and each other) without any mixing. By using several layers you can create a rich, natural finish on your models that looks fantastic on the battlefield.
All of our paints are non-toxic, water-based acrylic that are designed for use on plastic, metal, and resin miniatures. One pot contains 12ml of layer paint.
Acrylics colors in a matt and opaque, water-based formula, especially designed for brush-on use. Each color has been meticulously developed in collaboration with model-painters who specialize in fantasy figures and dioramas. The formulation of these colors has been developed signed taking into account that some of these figures are used in tabletop games, so that Game Color is manufactured with a revolutionary new resin which offers extraordinary resistance to the damage caused by frequent handling. It is recommended to apply Game Color on a previously primed surface. The colors dry rapidly and form a homogenous and self-leveling film while preserving even the smallest detail of a miniature. Game Color presents an extra ordinary adherence on all grounds, such as resin, plastic, steel and white metal. Painting tools are cleaned with water.
Game Color is not flammable, and does not contain solvents
This book is an essential guide for anyone who wants to collect Tyranids and unleash the power of the Hive Mind on the tabletop. Inside these pages, you’ll find all the rules you need to play a Tyranids army in games of Warhammer 40,000 – including Crusade and Combat Patrol rules – along with detailed accounts of their rapacious behaviour, divergent hive fleets, horrifying biotechnology, and invasions past and present.
Inside this 120-page hardback book, you'll find: – In-depth background information exploring the alien nature and murky origins of the Tyranids, from their nightmarish biology to the history of the Tyrannic Wars – Stunning artwork highlighting the horrifying variety and vast scope of these ever-evolving xenos swarms – 47 datasheets detailing the profiles, wargear, and unique abilities of every Tyranids unit, from swarming Termagants to the mighty Norn Emissary – Six themed Detachments for Tyranids armies, such as the Invasion Fleet and Crusher Stampede, each with their own set of special rules – Crusade rules for infesting and consuming entire planets in your narrative campaigns, as your army feasts on its victims and develops new adaptations – Self-contained Combat Patrol rules and a painting guide, allowing you to play fast-paced games with the Vardenghast Swarm – An 'Eavy Metal showcase of superbly-painted Citadel miniatures to inspire you, featuring a variety of Tyranid hive fleet colour schemes
This book also contains a one-use code to unlockCodex: Tyranids content in Warhammer 40,000: The App.
Ideal for filling in small gaps on miniatures, Liquid Green Stuff has been designed for hobbyists and enthusiasts who want a smooth, even finish when converting or modifying their models. Water soluble, with a striking label making it stand out from your Citadel paints, Liquid Green Stuff can be easily filed down with a Citadel File once set.
