1

This is a direct order only item, if this item is out of stock, it may take at least a week to arrive if not longer. Please contact us for additional details.

This is a direct order only item, if this item is out of stock, it may take at least a week to arrive if not longer. Please contact us for additional details.

This is a direct order only item, if this item is out of stock, it may take at least a week to arrive if not longer. Please contact us for additional details.

Strong winds carry yellowish and brown leaves away. Autumn Shrubs send their messages, full of color, announcing to farmers the harvest season - a time to gather.

This sheet contains around 75 different shaped and sized tufts for your scale models, hobby figures and scenic dioramas.
We recommend using a pair of tweezers for more control to peel the tufts off the sheet. For a more tough and permanent fix, you can use a little PVA glue.

Colourless brush acrylic retardant designed to increase the drying and blending time. Increases the transparency of paints. Compatible with all acrylic paints. Do not add more than 10% by volume.

Thinner for airbrushing. Dilutes color without loss of adhesion, resistance and consistency. Thinner is used to extend the colors, to increase fluidity and delay the drying time. We recommend the addition of a few drops of Thinner to the colors while airbrushing.

Bond Enforcing Dust

Hardening Dust for cyanoacrylate glues to increase filling and bond strength. Highly refined powder to a granulometry of 45-90 microns to maximize the hardening effect.

Apply to the cyanoacrylate and allow to react for 5 min. Excess can then be sanded off and applied to solid surfaces. Not soluble in water. Non-toxic. Close container tightly after use.

Contents: 20gr.

Brush Repair Gel

Recover the tip of your used brushes and leave them as brand new. 
Water soluble and does not stain. Semi-transparent colour. 
Used at the end of the brush productions to give them the final touch.

Wet the tip of the brush on the gel, forming it with your fingers and let it dry about 10 minutes. Before repainting, wipe the tip of the brush a bit in water to soften it. 
Repeat the process after each painting session and your brushes will be always like new!

This set includes a 25 ml pot

Shelf life: 6 months

Colourless brush acrylic retardant designed to increase the drying and blending time. Increases the transparency of paints. Compatible with all acrylic paints. Do not add more than 10% by volume.

Chipping Medium is a waterbased medium to create flaked paint, scratches, and rust chips. Chipping Medium can be applied with airbrush or brush to create chipping effects with waterbased acrylic colors.

Chipping Medium

Acrylic Chipping Medium to achieve aging effects, chipping, weathering, scuffing, chafing and scratching on your models.


Instructions

1. Apply a layer of Chipping on the area to be aged.

2. Paint normally on top and then rub the area with a damp brush to lift the paint. The effect is immediate.

3. Once the effect is achieved you can varnish to protect the area.


Valid for brush and airbrush.

Content: 1 bottle of 17 ml.

Decal Fix cleans and prepares the model surface before placing decals and wet transfers, improves adherence of the decal, and prevents formation of air bubbles without need for a previous coat of varnish.

GSW Decal Fixer helps the application of decals onto surfaces of models, miniatures and dioramas. The GSW Decal Fixer prepares the surface with special agents that soften the solvents of modern paints making decals more resistant and glue stronger. In addition, the decal fixer makes the decal more flexible and increases the adherence, preventing the silvering effect.

Content: 1x 17ml bottle

INSTRUCTIONS

1.- Before applying a decal to your model, apply a bit of GSW Decal Fixer to the surface of the model where you are planning to set your decal. GSW Decal Fixer protects the paint beneath and smooths the surface, thereby helping to prevent silvering. Use a paintbrush to gently push the decal off the sheet and onto the model. If it is hard to move the decal around, adding bit more GSW Decal Fixer or water will help the decal float on the surface until it is positioned correctly.
2.- If the surface where you want to apply the flat decal is curved, like a shoulder pad, your decal could become wrinkled. To avoid this, once your decal is in place, apply GSW Decal Softener. Let the softener react and it will help remove wrinkles, as it adapts to the curved surface underneath. Repeat this step 2-3 times till wrinkles are removed.
Remove any excess with a cotton swab to remove the liquid caught between the decal and the surface. Roll the swab over the decal so it does not lift from the surface. You can also use a paper towel to press down on the decal in a rolling motion to remove the excess of liquids. By using GSW Decal Softener the relief cuts to remove wrinkles in your decal will not be needed.
3.- Finally apply GSW Decal Fixer again to the decal and the surface of the model where we have been working to unify the surface. Coat it as normal with matt or gloss varnish if you consider it necessary to remove or add a glossy finish.

Decal Softener is a medium which protects the decal and smoothes its edges so that they blend with the surface of the model. Decal Softener also softens the decal to adapt it to surface details such as recessed lines, raised edges, screws or bolts.

The GSW Decal softener is the solution for the application of decals on uneven or rough surfaces.
It completely softens the decal to allow it to adapt and be perfectly fixed to the surface of the model in order to avoid the appearance of wrinkles, and in this way, you can obtain perfect results that otherwise would be impossible.

Content: 1x 17ml bottle

INSTRUCTIONS
If the surface where you want to apply the flat decal is curved, like a shoulder pad, your decal could become wrinkled. To avoid this, once your decal is in place, apply GSW Decal Softener. Let the softener react and it will help remove wrinkles, as it adapts to the curved surface underneath. Repeat this step 2-3 times till wrinkles are removed.
Remove any excess with a cotton swab to remove the liquid caught between the decal and the surface. Roll the swab over the decal so it does not lift from the surface. You can also use a paper towel to press down on the decal in a rolling motion to remove the excess of liquids. By using GSW Decal Softener the relief cuts to remove wrinkles in your decal will not be needed.

Airbrush Flow Improver is a medium to improve the flow & delay the drying of paint on the needle. We recommend adding 1-2 drops Flow Improver to 10 drops of paint in the cup of the airbrush.

Acrylics colors in a matt and opaque, water-based formula, especially designed for brush-on use. Each color has been meticulously developed in collaboration with model-painters who specialize in fantasy figures and dioramas. The formulation of these colors has been developed signed taking into account that some of these figures are used in tabletop games, so that Game Color is manufactured with a revolutionary new resin which offers extraordinary resistance to the damage caused by frequent handling. It is recommended to apply Game Color on a previously primed surface. The colors dry rapidly and form a homogenous and self-leveling film while preserving even the smallest detail of a miniature. Game Color presents an extra ordinary adherence on all grounds, such as resin, plastic, steel and white metal. Painting tools are cleaned with water.
Game Color is not flammable, and does not contain solvents

Gloss Medium extends the colors, increases their fluidity and transparence, and softens the blending of brushstrokes. It heightens the flexibility of the colors, and their adhesion to the surface. Does not yellow or change tonality of the color. Can also be used as a binder for dry pigment.