These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve.
Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
Foam Sealer is a fine paste intended for sealing any type of foam. This paste does not damage the foam and protects it from subsequent aggressive processes. It is an acrylic product, so you can dilute it with water and clean your tools easily. We recommend to apply it with a spatula to distribute the paste over the foam. Dries in one hour (depending on the thickness of the applied layer and the environmental conditions). Comes in a neutral white color not to affect the further paint layers. Close the packaging well, allowing the product to last longer. Use a spatula or an old brush for handling.
A low odor, 2 part component epoxy resin that simulates crystal clear water for miniature, dioramas, vignettes, etc and other hobbies. It includes 2 syringes and instructions in the box. It does not shrink and nor leaves bubbles. High quality product completely transparent that can be thinned if desired. Mix resin and hardening agent in 2:1 ratio an let dry for 24 hours. Instructions and guide in the box.
Spring snow texture used to achieve ultra realistic thin layers of snow. Snow sprinkles is a versatile product that can be used on its own; it also combines perfectly with AK8011 Snow Terrains. This is a high quality acrylic product developed for extreme realism. The drying time takes from 2-4 hours depending on the amount applied and temperature. Acrylic product to achieve snow texture. Perfect result in thin layers. It can be diluted with water or an acrylic thinner to improve its flow.
These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve.
Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
Wet Ground has been formulated for creating wet ground splattering and accumulation on vehicles, diorama�s, and vignettes. Wet Ground is just the right consistency; easily handled by brush, creating realistic textures of accumulated wet ground and dirt on lower vehicle surfaces has never been easier. It can be diluted with water or an acrylic thinner to improve its flow.
Powder snow texture to for use over terrain or vehicle surfaces to achieve thawing snow or the first phases of a snowfall. It can be fixed with white glue, with varnish or with gravel & sand and in combination with wet effects to achieve perfect results. It can also be mixed with AK Puddles to get different kinds of dirty snow.
These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve.
Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
Special effects for splatters on vehicles, dioramas and vignettes. Its composition allows easy handling with a brush achieving a very realistic texture and effect on the lower parts of vehicles. Special consistency for splatter effects. It can be diluted with water or an acrylic thinner to improve its flow.
Specially selected natural gravel, perfect for recreating groundworks in any type of scene or diorama.
This product is best suited for use in 1/35 scale railway scenes, but it can also be used for supplementing any type of ground on bases ranging from 28mm to larger scales.
This is a two-component coloured resin with a low odour, intended to simulate radioactive and toxic water in scenery, dioramas, etc. Two-component epoxy-type resin with low odour. Resin and hardener come in separate bottles with dispensing nozzles. Two syringes are included in the box.
The mixing ratio is 2:1. The curing process depends on the resin layer and the ambient temperature and usually takes about 24 hours. The components should be mixed thoroughly, stirring the mixture. It is advisable to avoid stirring during the process to avoid the generation of air bubbles that will be trapped. Pour in an enclosed space without cracks to contain the liquid. Recommended thickness is up to 5cm.
Natural soil with small gravel.This reference is perfect for use in any scene or diorama to represent an arid terrainin 1/35 scale.It can also be used on any type of base from 28mm to larger scales. It can be adheredto the ground using white glue or Gravel & Sand Fixer (AK118)
